# packages

pkgId: a5f552adcf361ff1a7987a1f487d571f4d7629e3b4411548c70bfb494ec5f7a3
name: ndctl
arch: s390x
version: 78
epoch: 0
release: 4.el10
summary: Manage "libnvdimm" subsystem devices (Non-volatile Memory)
url: https://github.com/pmem/ndctl
rpm_license: GPLv2
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: ndctl-78-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/ndctl-78-4.el10.s390x.rpm
checksum_type: sha256
description:
  Utility library for managing the "libnvdimm" subsystem.  The "libnvdimm"
  subsystem defines a kernel device model and control message interface for
  platform NVDIMM resources like those defined by the ACPI 6+ NFIT (NVDIMM
  Firmware Interface Table).


pkgId: f6df9f1e3747d547a77c358d2d4dd5a372a819d45ff432d7357dd603f3075c65
name: net-naming-sysattrs
arch: noarch
version: 263
epoch: 0
release: 1.el10.1
summary: Mechanism to emulate older network device naming behavior
url: https://gitlab.com/mschmidt2/net-naming-sysattrs
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-03.stream.rdu2.redhat.com
rpm_sourcerpm: net-naming-sysattrs-263-1.el10.1.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/net-naming-sysattrs-263-1.el10.1.noarch.rpm
checksum_type: sha256
description:
  This package provides hwdb and udev rules to filter the sysfs attributes used
  by systemd-udev for network device naming.

  Historically, the introduction of the "phys_port_name" attribute in newer
  kernels caused interface names to change for certain drivers. While these names
  can be manually reconfigured with systemd.link files or custom udev rules, this
  package offers a streamlined mechanism to emulate the naming behavior of older
  distribution releases (RHEL 9.0 and later).

  The desired naming scheme can be specified on the kernel command line:
    net.naming-scheme=rhel-9.6
  (Default: rhel-9.0)


pkgId: dc356cf04a9709088c854955319bc8fa5a115e17bcb42bef85f46b295914a5ca
name: net-tools
arch: s390x
version: 2.0
epoch: 0
release: 0.72.20160912git.el10
summary: Basic networking tools
url: http://sourceforge.net/projects/net-tools/
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: net-tools-2.0-0.72.20160912git.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/net-tools-2.0-0.72.20160912git.el10.s390x.rpm
checksum_type: sha256
description:
  The net-tools package contains basic networking tools,
  including ifconfig, netstat, route, and others.
  Most of them are obsolete. For replacement check iproute package.


pkgId: ca8cbce3e8b865d086f5e7fe4882ee829445b7eb2fd7458f8b32438b6b5a9606
name: netconsole-service
arch: noarch
version: 10.25
epoch: 0
release: 1.el10
summary: Service for initializing of network console logging
url: https://github.com/fedora-sysv/initscripts
rpm_license: GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: initscripts-10.25-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/netconsole-service-10.25-1.el10.noarch.rpm
checksum_type: sha256
description:
  This packages provides a 'netconsole' service for loading of netconsole kernel
  module with the configured parameters. The netconsole kernel module itself then
  allows logging of kernel messages over the network.


pkgId: 8171cff0750ec4fe532d992c90e48878605cf9a561f013e66fad39ba03ef06d7
name: netlabel_tools
arch: s390x
version: 0.30.0
epoch: 0
release: 19.el10
summary: Tools to manage the Linux NetLabel subsystem
url: https://github.com/netlabel/netlabel_tools
rpm_license: GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: netlabel_tools-0.30.0-19.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/netlabel_tools-0.30.0-19.el10.s390x.rpm
checksum_type: sha256
description:
  NetLabel is a kernel subsystem which implements explicit packet labeling
  protocols such as CIPSO for Linux.  Packet labeling is used in secure networks
  to mark packets with the security attributes of the data they contain.  This
  package provides the necessary user space tools to query and configure the
  kernel subsystem.


pkgId: 5d479fb3958b28fa708f45f77bbcf0f0ef89ac936707230f99cdf5d0f26dea1d
name: nettle
arch: s390x
version: 3.10
epoch: 0
release: 1.el10
summary: A low-level cryptographic library
url: http://www.lysator.liu.se/~nisse/nettle/
rpm_license: LGPL-3.0-or-later OR GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: nettle-3.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/nettle-3.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  Nettle is a cryptographic library that is designed to fit easily in more
  or less any context: In crypto toolkits for object-oriented languages
  (C++, Python, Pike, ...), in applications like LSH or GNUPG, or even in
  kernel space.


pkgId: 152c9f8eae77d189587447a21b2b485150011bdada48f3440ce45d5d4712c85b
name: newt
arch: s390x
version: 0.52.24
epoch: 0
release: 4.el10
summary: A library for text mode user interfaces
url: https://pagure.io/newt
rpm_license: LGPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: newt-0.52.24-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/newt-0.52.24-4.el10.s390x.rpm
checksum_type: sha256
description:
  Newt is a programming library for color text mode, widget based user
  interfaces.  Newt can be used to add stacked windows, entry widgets,
  checkboxes, radio buttons, labels, plain text fields, scrollbars,
  etc., to text mode user interfaces.  This package also contains the
  shared library needed by programs built with newt, as well as a
  /usr/bin/dialog replacement called whiptail.  Newt is based on the
  slang library.


pkgId: 59778b5ccdc2d6307da5e91bda43dfad8ca60363c0190c5656f997ecf0f6e751
name: nfs-utils
arch: s390x
version: 2.8.3
epoch: 1
release: 3.el10
summary: NFS utilities and supporting clients and daemons for the kernel NFS server
url: http://linux-nfs.org/
rpm_license: MIT and GPLv2 and GPLv2+ and BSD
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: nfs-utils-2.8.3-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/nfs-utils-2.8.3-3.el10.s390x.rpm
checksum_type: sha256
description:
  The nfs-utils package provides a daemon for the kernel NFS server and
  related tools, which provides a much higher level of performance than the
  traditional Linux NFS server used by most users.

  This package also contains the showmount program.  Showmount queries the
  mount daemon on a remote host for information about the NFS (Network File
  System) server on the remote host.  For example, showmount can display the
  clients which are mounted on that host.

  This package also contains the mount.nfs and umount.nfs program.


pkgId: a5aeecdf3359a1775f058985b8a1470f8d9b8b634a8be3768fa84226e020b203
name: npth
arch: s390x
version: 1.6
epoch: 0
release: 19.el10
summary: The New GNU Portable Threads library
url: https://git.gnupg.org/cgi-bin/gitweb.cgi?p=npth.git
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: npth-1.6-19.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/npth-1.6-19.el10.s390x.rpm
checksum_type: sha256
description:
  nPth is a non-preemptive threads implementation using an API very similar
  to the one known from GNU Pth. It has been designed as a replacement of
  GNU Pth for non-ancient operating systems. In contrast to GNU Pth is is
  based on the system's standard threads implementation. Thus nPth allows
  the use of libraries which are not compatible to GNU Pth.


pkgId: 0845221c90ec432dbcbcd03c08fc1adc7e46cb6457887fac9196a2f8760638da
name: numactl
arch: s390x
version: 2.0.18
epoch: 0
release: 2.el10
summary: Library for tuning for Non Uniform Memory Access machines
url: https://github.com/numactl/numactl
rpm_license: GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: numactl-2.0.18-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/numactl-2.0.18-2.el10.s390x.rpm
checksum_type: sha256
description:
  Simple NUMA policy support. It consists of a numactl program to run
  other programs with a specific NUMA policy.


pkgId: c437f7cc47a6e88152956395c96fa8ba359a5e9b288a09ad1c4200160de299f7
name: nvmetcli
arch: noarch
version: 0.7
epoch: 0
release: 13.el10
summary: An adminstration shell for NVMe storage targets
url: ftp://ftp.infradead.org/pub/nvmetcli/
rpm_license: ASL 2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.stream.rdu2.redhat.com
rpm_sourcerpm: nvmetcli-0.7-13.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/nvmetcli-0.7-13.el10.noarch.rpm
checksum_type: sha256
description:
  This package contains the command line interface to the NVMe over Fabrics
  nvmet in the Linux kernel.  It allows configuring the nvmet interactively
  as well as saving / restoring the configuration to / from a json file.


pkgId: ae9829eaf3ea9560210c921d922dbefde4411827200ef19de16a8cd9435c6d51
name: oniguruma
arch: s390x
version: 6.9.9
epoch: 0
release: 6.el10
summary: Regular expressions library
url: https://github.com/kkos/oniguruma/
rpm_license: BSD-2-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: oniguruma-6.9.9-6.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/oniguruma-6.9.9-6.el10.s390x.rpm
checksum_type: sha256
description:
  Oniguruma is a regular expressions library.
  The characteristics of this library is that different character encoding
  for every regular expression object can be specified.
  (supported APIs: GNU regex, POSIX and Oniguruma native)


pkgId: 03d866409c87b6f4fe739d98e4888d9812be378962cdfc2b2ecc8bd031b44fbe
name: opencryptoki
arch: s390x
version: 3.25.0
epoch: 0
release: 3.el10
summary: Implementation of the PKCS#11 (Cryptoki) specification v3.0 and partially v3.1
url: https://github.com/opencryptoki/opencryptoki
rpm_license: CPL-1.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: opencryptoki-3.25.0-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/opencryptoki-3.25.0-3.el10.s390x.rpm
checksum_type: sha256
description:
  Opencryptoki implements the PKCS#11 specification  v3.0 and partially v3.1
  for a set of cryptographic hardware, such as IBM 4767, 4768, 4769 and 4770
  crypto cards, and the Trusted Platform Module (TPM) chip. Opencryptoki also
  brings a software token implementation that can be used without any cryptographic
  hardware.
  This package contains the Slot Daemon (pkcsslotd) and general utilities.


pkgId: 3cb90036db5ee22cd015972cdbc8c45067ff2e6490505d81a9abbf21677fcf8c
name: opencryptoki-ccatok
arch: s390x
version: 3.25.0
epoch: 0
release: 3.el10
summary: CCA cryptographic devices (secure-key) support for opencryptoki
url: https://github.com/opencryptoki/opencryptoki
rpm_license: CPL-1.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: opencryptoki-3.25.0-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/opencryptoki-ccatok-3.25.0-3.el10.s390x.rpm
checksum_type: sha256
description:
  Opencryptoki implements the PKCS#11 specification  v3.0 and partially v3.1
  for a set of cryptographic hardware, such as IBM 4767, 4768, 4769 and 4770
  crypto cards, and the Trusted Platform Module (TPM) chip. Opencryptoki also
  brings a software token implementation that can be used without any cryptographic
  hardware.
  This package brings the necessary libraries and files to support CCA
  devices in the opencryptoki stack. CCA is an interface to IBM
  cryptographic hardware such as IBM 4767, 4768, 4769 and 4770 that uses the
  "co-processor" or "secure-key" path.


pkgId: d3f214f31bd5699b56c95534627c682f0061cef65e47b4589b9df442136a9ec7
name: opencryptoki-ep11tok
arch: s390x
version: 3.25.0
epoch: 0
release: 3.el10
summary: EP11 cryptographic devices (secure-key) support for opencryptoki
url: https://github.com/opencryptoki/opencryptoki
rpm_license: CPL-1.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: opencryptoki-3.25.0-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/opencryptoki-ep11tok-3.25.0-3.el10.s390x.rpm
checksum_type: sha256
description:
  Opencryptoki implements the PKCS#11 specification  v3.0 and partially v3.1
  for a set of cryptographic hardware, such as IBM 4767, 4768, 4769 and 4770
  crypto cards, and the Trusted Platform Module (TPM) chip. Opencryptoki also
  brings a software token implementation that can be used without any cryptographic
  hardware.
  This package brings the necessary libraries and files to support EP11
  tokens in the opencryptoki stack. The EP11 token is a token that uses
  the IBM Crypto Express adapters (starting with Crypto Express 4S adapters)
  configured with Enterprise PKCS#11 (EP11) firmware.


pkgId: d4b9c2abbca96acba9792f1e1cc005f66dab4883f268689027c5aedcb62e67fd
name: opencryptoki-icatok
arch: s390x
version: 3.25.0
epoch: 0
release: 3.el10
summary: ICA cryptographic devices (clear-key) support for opencryptoki
url: https://github.com/opencryptoki/opencryptoki
rpm_license: CPL-1.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: opencryptoki-3.25.0-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/opencryptoki-icatok-3.25.0-3.el10.s390x.rpm
checksum_type: sha256
description:
  Opencryptoki implements the PKCS#11 specification  v3.0 and partially v3.1
  for a set of cryptographic hardware, such as IBM 4767, 4768, 4769 and 4770
  crypto cards, and the Trusted Platform Module (TPM) chip. Opencryptoki also
  brings a software token implementation that can be used without any cryptographic
  hardware.
  This package brings the necessary libraries and files to support ICA
  devices in the opencryptoki stack. ICA is an interface to IBM
  cryptographic hardware such as IBM 4767, 4768, 4769 and 4770 that uses the
  "accelerator" or "clear-key" path.


pkgId: def0d6d13b17ea6412ca035ea34c0e8a4587de8cd5e907a212de55ec89d7cf47
name: opencryptoki-icsftok
arch: s390x
version: 3.25.0
epoch: 0
release: 3.el10
summary: ICSF token support for opencryptoki
url: https://github.com/opencryptoki/opencryptoki
rpm_license: CPL-1.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: opencryptoki-3.25.0-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/opencryptoki-icsftok-3.25.0-3.el10.s390x.rpm
checksum_type: sha256
description:
  Opencryptoki implements the PKCS#11 specification  v3.0 and partially v3.1
  for a set of cryptographic hardware, such as IBM 4767, 4768, 4769 and 4770
  crypto cards, and the Trusted Platform Module (TPM) chip. Opencryptoki also
  brings a software token implementation that can be used without any cryptographic
  hardware.
  This package brings the necessary libraries and files to support
  ICSF token in the opencryptoki stack.


pkgId: 0648cea0634e569f15e8b7e95916ecd6d0373542e0a9eca11b8d433109bd27df
name: opencryptoki-libs
arch: s390x
version: 3.25.0
epoch: 0
release: 3.el10
summary: The run-time libraries for opencryptoki package
url: https://github.com/opencryptoki/opencryptoki
rpm_license: CPL-1.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: opencryptoki-3.25.0-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/opencryptoki-libs-3.25.0-3.el10.s390x.rpm
checksum_type: sha256
description:
  Opencryptoki implements the PKCS#11 specification  v3.0 and partially v3.1
  for a set of cryptographic hardware, such as IBM 4767, 4768, 4769 and 4770
  crypto cards, and the Trusted Platform Module (TPM) chip. Opencryptoki also
  brings a software token implementation that can be used without any cryptographic
  hardware.
  This package contains the PKCS#11 library implementation, and requires
  at least one token implementation (packaged separately) to be fully
  functional.


pkgId: 70662fb87d3155f1889e900f5ad43fb2b179080ee5e883a2b98f9ea43cd511d4
name: opencryptoki-swtok
arch: s390x
version: 3.25.0
epoch: 0
release: 3.el10
summary: The software token implementation for opencryptoki
url: https://github.com/opencryptoki/opencryptoki
rpm_license: CPL-1.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: opencryptoki-3.25.0-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/opencryptoki-swtok-3.25.0-3.el10.s390x.rpm
checksum_type: sha256
description:
  Opencryptoki implements the PKCS#11 specification  v3.0 and partially v3.1
  for a set of cryptographic hardware, such as IBM 4767, 4768, 4769 and 4770
  crypto cards, and the Trusted Platform Module (TPM) chip. Opencryptoki also
  brings a software token implementation that can be used without any cryptographic
  hardware.
  This package brings the software token implementation to use opencryptoki
  without any specific cryptographic hardware.


pkgId: 8ccbbb3c19df87e02214012a0fb7eed53455db552b6548e482734f65039b6057
name: openldap
arch: s390x
version: 2.6.10
epoch: 0
release: 1.el10
summary: LDAP support libraries
url: http://www.openldap.org/
rpm_license: OLDAP-2.8
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: openldap-2.6.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openldap-2.6.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  OpenLDAP is an open source suite of LDAP (Lightweight Directory Access
  Protocol) applications and development tools. LDAP is a set of
  protocols for accessing directory services (usually phone book style
  information, but other information is possible) over the Internet,
  similar to the way DNS (Domain Name System) information is propagated
  over the Internet. The openldap package contains configuration files,
  libraries, and documentation for OpenLDAP.


pkgId: eab6752e3cd81e187d3bd458fd4e7a05b8b3718c79de34c2d7b76cbcb0928ddc
name: openldap-clients
arch: s390x
version: 2.6.10
epoch: 0
release: 1.el10
summary: LDAP client utilities
url: http://www.openldap.org/
rpm_license: OLDAP-2.8
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: openldap-2.6.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openldap-clients-2.6.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  OpenLDAP is an open-source suite of LDAP (Lightweight Directory Access
  Protocol) applications and development tools. LDAP is a set of
  protocols for accessing directory services (usually phone book style
  information, but other information is possible) over the Internet,
  similar to the way DNS (Domain Name System) information is propagated
  over the Internet. The openldap-clients package contains the client
  programs needed for accessing and modifying OpenLDAP directories.


pkgId: 3dd8fd4e6317bdb9eedfbda36bd8f604b7af295852db661a187e76176ce02ac2
name: openldap-compat
arch: s390x
version: 2.6.10
epoch: 0
release: 1.el10
summary: Package providing legacy non-threaded libldap
url: http://www.openldap.org/
rpm_license: OLDAP-2.8
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: openldap-2.6.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openldap-compat-2.6.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  The openldap-compat package contains shared libraries named as libldap-2.4.so,



  libldap_r-2.4.so and liblber-2.4.so

  The libraries are just links to the current version shared libraries,
  and are available for compatibility reasons.


pkgId: cb0ea88d2f9284856f1661712b0582bb7981cf63cbc8aeecd3e1343f17c3388f
name: opensc
arch: s390x
version: 0.25.1
epoch: 0
release: 4.el10
summary: Smart card library and applications
url: https://github.com/OpenSC/OpenSC/wiki
rpm_license: LGPL-2.1-or-later AND BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: opensc-0.25.1-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/opensc-0.25.1-4.el10.s390x.rpm
checksum_type: sha256
description:
  OpenSC provides a set of libraries and utilities to work with smart cards. Its
  main focus is on cards that support cryptographic operations, and facilitate
  their use in security applications such as authentication, mail encryption and
  digital signatures. OpenSC implements the PKCS#11 API so applications
  supporting this API (such as Mozilla Firefox and Thunderbird) can use it. On
  the card OpenSC implements the PKCS#15 standard and aims to be compatible with
  every software/card that does so, too.


pkgId: 53e2d5534c2c9b04b538c492a1ee9c1ae7bd521e0e2ec33d5e6eed985d286001
name: openssh
arch: s390x
version: 9.9p1
epoch: 0
release: 20.el10
summary: An open source implementation of SSH protocol version 2
url: http://www.openssh.com/portable.html
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: openssh-9.9p1-20.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openssh-9.9p1-20.el10.s390x.rpm
checksum_type: sha256
description:
  SSH (Secure SHell) is a program for logging into and executing
  commands on a remote machine. SSH is intended to replace rlogin and
  rsh, and to provide secure encrypted communications between two
  untrusted hosts over an insecure network. X11 connections and
  arbitrary TCP/IP ports can also be forwarded over the secure channel.

  OpenSSH is OpenBSD's version of the last free version of SSH, bringing
  it up to date in terms of security and features.

  This package includes the core files necessary for both the OpenSSH
  client and server. To make this package useful, you should also
  install openssh-clients, openssh-server, or both.

rpm_license:
  BSD-3-Clause AND BSD-2-Clause AND ISC AND SSH-OpenSSH AND ssh-keyscan AND sprintf AND LicenseRef-Fedora-Public-Domain AND X11-distribute-modifications-variant


pkgId: aa77e3a64ea1f776334e0af1be5a591b7ea13bcc5dd92f8f41405f5ff13ed2de
name: openssh
arch: s390x
version: 9.9p1
epoch: 0
release: 24.el10
summary: An open source implementation of SSH protocol version 2
url: http://www.openssh.com/portable.html
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: openssh-9.9p1-24.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openssh-9.9p1-24.el10.s390x.rpm
checksum_type: sha256
description:
[cell repeats an earlier one in this file: 630 characters]

rpm_license:
  BSD-3-Clause AND BSD-2-Clause AND ISC AND SSH-OpenSSH AND ssh-keyscan AND snprintf AND LicenseRef-Fedora-Public-Domain AND X11-distribute-modifications-variant


pkgId: ba35cde05803e78b308080b0bc25337840ab8d1de2537399a3229f956f966da8
name: openssh-clients
arch: s390x
version: 9.9p1
epoch: 0
release: 20.el10
summary: An open source SSH client applications
url: http://www.openssh.com/portable.html
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: openssh-9.9p1-20.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openssh-clients-9.9p1-20.el10.s390x.rpm
checksum_type: sha256
description:
  OpenSSH is a free version of SSH (Secure SHell), a program for logging
  into and executing commands on a remote machine. This package includes
  the clients necessary to make encrypted connections to SSH servers.

rpm_license:
[cell repeats an earlier one in this file: 158 characters]


pkgId: 4987835647c0c525ca6b1dd443ab606ba98a7d0c58054508736af404784c09b6
name: openssh-server
arch: s390x
version: 9.9p1
epoch: 0
release: 20.el10
summary: An open source SSH server daemon
url: http://www.openssh.com/portable.html
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: openssh-9.9p1-20.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openssh-server-9.9p1-20.el10.s390x.rpm
checksum_type: sha256
description:
  OpenSSH is a free version of SSH (Secure SHell), a program for logging
  into and executing commands on a remote machine. This package contains
  the secure shell daemon (sshd). The sshd daemon allows SSH clients to
  securely connect to your SSH server.

rpm_license:
[cell repeats an earlier one in this file: 158 characters]


pkgId: 66a6bff0f305e3cb925766c2d84faa55f8de298d59fb2542434b6236a13b0cdf
name: openssl
arch: s390x
version: 3.5.1
epoch: 1
release: 3.el10
summary: Utilities from the general purpose cryptography library with TLS implementation
url: http://www.openssl.org/
rpm_license: Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: openssl-3.5.1-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openssl-3.5.1-3.el10.s390x.rpm
checksum_type: sha256
description:
  The OpenSSL toolkit provides support for secure communications between
  machines. OpenSSL includes a certificate management tool and shared
  libraries which provide various cryptographic algorithms and
  protocols.


pkgId: 053f06c591ab28f51c70b1be547b4669658583bb676488dada1b98f00dce8483
name: openssl-fips-provider
arch: s390x
version: 3.5.1
epoch: 1
release: 3.el10
summary: The FIPS Provider module
url: http://www.openssl.org/
rpm_license: Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: openssl-3.5.1-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openssl-fips-provider-3.5.1-3.el10.s390x.rpm
checksum_type: sha256
description:
  OpenSSL is a toolkit for supporting cryptography. The openssl-fips-provider
  package provides the fips.so provider, a cryptography provider that follows
  FIPS requirements and provides FIPS approved algorithms.


pkgId: df17de11e5a66b139777d3c88afac176b1db0b8705e25e22864f4fa6b1a93a94
name: openssl-ibmca
arch: s390x
version: 2.4.1
epoch: 0
release: 5.el10
summary: OpenSSL provider for IBMCA
url: https://github.com/opencryptoki
rpm_license: Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: openssl-ibmca-2.4.1-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openssl-ibmca-2.4.1-5.el10.s390x.rpm
checksum_type: sha256
description:
  A dynamic OpenSSL provider for IBMCA crypto hardware on IBM Z machines
  to accelerate cryptographic operations.


pkgId: 27bf8b73565f2a691748895cff8382ee46fd9b6ef650a9c863bd519972e24f14
name: openssl-libs
arch: s390x
version: 3.5.1
epoch: 1
release: 3.el10
summary: A general purpose cryptography library with TLS implementation
url: http://www.openssl.org/
rpm_license: Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: openssl-3.5.1-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/openssl-libs-3.5.1-3.el10.s390x.rpm
checksum_type: sha256
description:
  OpenSSL is a toolkit for supporting cryptography. The openssl-libs
  package contains the libraries that are used by various applications which
  support cryptographic algorithms and protocols.


pkgId: a60a6e86037a966ee49b007debc9ac95cb383bb2e42266f0696f852bde1eb5e3
name: oqsprovider
arch: s390x
version: 0.8.0
epoch: 0
release: 5.el10
summary: oqsprovider is an OpenSSL provider for quantum-safe algorithms based on liboqs
url: https://github.com/open-quantum-safe/oqs-provider.git
rpm_license: Apache-2.0 AND MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: oqsprovider-0.8.0-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/oqsprovider-0.8.0-5.el10.s390x.rpm
checksum_type: sha256
description:
  oqs-provider fully enables quantum-safe cryptography for KEM key
  establishment in TLS1.3 including management of such keys via the OpenSSL (3.0)
  provider interface and hybrid KEM schemes. Also, QSC signatures including CMS
  functionality are available via the OpenSSL EVP interface. Key persistence is
  provided via the encode/decode mechanism and X.509 data structures.


pkgId: 338737dfbe60f308187903e0c317900aeedeb42a1b9aee4510d8dffb9cc1c65e
name: p11-kit
arch: s390x
version: 0.25.10
epoch: 0
release: 1.el10
summary: Library for loading and sharing PKCS#11 modules
url: http://p11-glue.freedesktop.org/p11-kit.html
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: p11-kit-0.25.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/p11-kit-0.25.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  p11-kit provides a way to load and enumerate PKCS#11 modules, as well
  as a standard configuration setup for installing PKCS#11 modules in
  such a way that they're discoverable.


pkgId: ddfea8361beb78f777d08b014ec5fba0029278d6b1501f7a47d5d61e9234ee4a
name: p11-kit-client
arch: s390x
version: 0.25.10
epoch: 0
release: 1.el10
summary: Client module from p11-kit
url: http://p11-glue.freedesktop.org/p11-kit.html
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: p11-kit-0.25.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/p11-kit-client-0.25.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  The p11-kit-client package contains a PKCS#11 module that enables
  accessing other PKCS#11 modules over a Unix domain socket.  Note that
  this feature is still experimental.


pkgId: c0c24c9abb2c588a4d58a5c540aef4482cf738800678eb117f336d3ea48e9153
name: p11-kit-trust
arch: s390x
version: 0.25.10
epoch: 0
release: 1.el10
summary: System trust module from p11-kit
url: http://p11-glue.freedesktop.org/p11-kit.html
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: p11-kit-0.25.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/p11-kit-trust-0.25.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  The p11-kit-trust package contains a system trust PKCS#11 module which
  contains certificate anchors and blocklists.


pkgId: 93b14245d37206fa348179228a269844d5404ab5e781574499825b49ba3d0323
name: pam
arch: s390x
version: 1.6.1
epoch: 0
release: 10.el10
summary: An extensible library which provides authentication for applications
url: http://www.linux-pam.org/
rpm_license: BSD-3-Clause AND GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: pam-1.6.1-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pam-1.6.1-10.el10.s390x.rpm
checksum_type: sha256
description:
  PAM (Pluggable Authentication Modules) is a system security tool that
  allows system administrators to set authentication policy without
  having to recompile programs that handle authentication.


pkgId: 52f36a9350a8c0b1fcadb9c96a1ecc5ba8b1665cb714bb28d0e20bda4c593dde
name: pam-libs
arch: s390x
version: 1.6.1
epoch: 0
release: 10.el10
summary: Shared libraries of the PAM package
url: http://www.linux-pam.org/
rpm_license: BSD-3-Clause AND GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: pam-1.6.1-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pam-libs-1.6.1-10.el10.s390x.rpm
checksum_type: sha256
description:
  PAM (Pluggable Authentication Modules) is a system security tool that
  allows system administrators to set authentication policy without
  having to recompile programs that handle authentication. The pam-libs
  contains the shared libraries for PAM.


pkgId: 7c22bdb4ce171a66434373c74c9c67e4e2af3be098efe6886fd2c7274d04ebba
name: parted
arch: s390x
version: 3.6
epoch: 0
release: 5.el10
summary: The GNU disk partition manipulation program
url: http://www.gnu.org/software/parted
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: parted-3.6-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/parted-3.6-5.el10.s390x.rpm
checksum_type: sha256
description:
  The GNU Parted program allows you to create, destroy, resize, move,
  and copy hard disk partitions. Parted can be used for creating space
  for new operating systems, reorganizing disk usage, and copying data
  to new hard disks.


pkgId: bfabbf259de1ae560562c1ccde9cccbede97e1d11c75d1ac60ff1bd04d560aa6
name: pciutils
arch: s390x
version: 3.13.0
epoch: 0
release: 1.el10
summary: PCI bus related utilities
url: https://mj.ucw.cz/sw/pciutils/
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: pciutils-3.13.0-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pciutils-3.13.0-1.el10.s390x.rpm
checksum_type: sha256
description:
  The pciutils package contains various utilities for inspecting and
  setting devices connected to the PCI bus.


pkgId: 2fb99cab0557e0d643ed708015c10dec814a3b96cc90b43da0adda49d301a473
name: pcre2
arch: s390x
version: 10.44
epoch: 0
release: 1.el10.2
summary: Perl-compatible regular expression library
url: https://www.pcre.org/
rpm_license: BSD-3-Clause AND FSFULLR AND X11 AND GPL-2.0-or-later AND FSFAP AND FSFUL AND GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: pcre2-10.44-1.el10.2.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pcre2-10.44-1.el10.2.s390x.rpm
checksum_type: sha256
description:
  PCRE2 is a re-working of the original PCRE (Perl-compatible regular
  expression) library to provide an entirely new API.

  PCRE2 is written in C, and it has its own API. There are three sets of
  functions, one for the 8-bit library, which processes strings of bytes, one
  for the 16-bit library, which processes strings of 16-bit values, and one for
  the 32-bit library, which processes strings of 32-bit values. There are no C++
  wrappers. This package provides support for strings in 8-bit and UTF-8
  encodings. Install pcre2-utf16 or pcre2-utf32 packages for the other ones.

  The distribution does contain a set of C wrapper functions for the 8-bit
  library that are based on the POSIX regular expression API (see the pcre2posix
  man page). These can be found in a library called libpcre2posix. Note that
  this just provides a POSIX calling interface to PCRE2; the regular expressions
  themselves still follow Perl syntax and semantics. The POSIX API is
  restricted, and does not give full access to all of PCRE2's facilities.


pkgId: 995d095cb0d6e2478705a87aa8f7f93285757e6c85b5bf5aa9818e855ec8d546
name: pcre2-syntax
arch: noarch
version: 10.44
epoch: 0
release: 1.el10.2
summary: Documentation for PCRE2 regular expressions
url: https://www.pcre.org/
rpm_license: BSD-3-Clause AND FSFULLR AND X11 AND GPL-2.0-or-later AND FSFAP AND FSFUL AND GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: pcre2-10.44-1.el10.2.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pcre2-syntax-10.44-1.el10.2.noarch.rpm
checksum_type: sha256
description:
  This is a set of manual pages that document a syntax of the regular
  expressions implemented by the PCRE2 library.


pkgId: 54517ca0af761816ae2246e4cf8029e1c563515f76eb84683fac8e6ec07f6a0b
name: pcsc-lite
arch: s390x
version: 2.2.3
epoch: 0
release: 1.el10
summary: PC/SC Lite smart card framework and applications
url: https://pcsclite.apdu.fr/
rpm_license: BSD-3-Clause AND BSD-2-Clause AND GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: pcsc-lite-2.2.3-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pcsc-lite-2.2.3-1.el10.s390x.rpm
checksum_type: sha256
description:
  The purpose of PC/SC Lite is to provide a Windows(R) SCard interface
  in a very small form factor for communicating to smartcards and
  readers.  PC/SC Lite uses the same winscard API as used under
  Windows(R).  This package includes the PC/SC Lite daemon, a resource
  manager that coordinates communications with smart card readers and
  smart cards that are connected to the system, as well as other command
  line tools.


pkgId: 7b79ab34a17eb660c89481b05ce9d42f81c40a608993afc46fe0831313a75d0e
name: perl-AutoLoader
arch: noarch
version: 5.74
epoch: 0
release: 510.el10
summary: Load subroutines only on demand
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-AutoLoader-5.74-510.el10.noarch.rpm
checksum_type: sha256
description:
  The AutoLoader module works with the AutoSplit module and the "__END__" token
  to defer the loading of some subroutines until they are used rather than
  loading them all at once.


pkgId: 98f0b7d41da46865fe5e2fb65b3f3700382ccb07ea739ac950803932b92472cc
name: perl-B
arch: s390x
version: 1.89
epoch: 0
release: 510.el10
summary: Perl compiler backend
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-B-1.89-510.el10.s390x.rpm
checksum_type: sha256
description:
  The "B" module supplies classes which allow a Perl program to delve into its
  own innards. It is the module used to implement the backends of the Perl
  compiler.


pkgId: 737ea900d9974cfcd388dc30b13d867b8d8965d600745fdc4868c44d3879e142
name: perl-Carp
arch: noarch
version: 1.54
epoch: 0
release: 510.el10
summary: Alternative warn and die for modules
url: https://metacpan.org/release/Carp
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Carp-1.54-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Carp-1.54-510.el10.noarch.rpm
checksum_type: sha256
description:
  The Carp routines are useful in your own modules because they act like
  die() or warn(), but with a message which is more likely to be useful to a
  user of your module. In the case of cluck, confess, and longmess that
  context is a summary of every call in the call-stack. For a shorter message
  you can use carp or croak which report the error as being from where your
  module was called. There is no guarantee that that is where the error was,
  but it is a good educated guess.


pkgId: 3f44f389113dde12ffc4bbcc5c33886ce44e555f9ec091dc5bedd189a80482a5
name: perl-Class-Struct
arch: noarch
version: 0.68
epoch: 0
release: 510.el10
summary: Declare struct-like data types as Perl classes
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Class-Struct-0.68-510.el10.noarch.rpm
checksum_type: sha256
description:
  Class::Struct module exports a single function struct(). Given a list of
  element names and types, and optionally a class name, struct() creates a
  Perl 5 class that implements a struct-like data structure.


pkgId: a35e43390740194e4212f5633ca08f62f9a65c585a69da10c472b3cee03cbd73
name: perl-Data-Dumper
arch: s390x
version: 2.189
epoch: 0
release: 511.el10
summary: Stringify perl data structures, suitable for printing and eval
url: https://metacpan.org/release/Data-Dumper
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Data-Dumper-2.189-511.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Data-Dumper-2.189-511.el10.s390x.rpm
checksum_type: sha256
description:
  Given a list of scalars or reference variables, writes out their contents
  in perl syntax. The references can also be objects. The content of each
  variable is output in a single Perl statement. Handles self-referential
  structures correctly.


pkgId: 6628165a3836dd5e54a9ff0441c79621bafcb80c53fb12cdb5720a624f65d376
name: perl-Digest
arch: noarch
version: 1.20
epoch: 0
release: 510.el10
summary: Modules that calculate message digests
url: https://metacpan.org/release/Digest
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Digest-1.20-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Digest-1.20-510.el10.noarch.rpm
checksum_type: sha256
description:
  The Digest:: modules calculate digests, also called "fingerprints" or
  "hashes", of some data, called a message. The digest is (usually) some
  small/fixed size string. The actual size of the digest depends of the
  algorithm used. The message is simply a sequence of arbitrary bytes or bits.


pkgId: c06afbe943d01bda2a86b73c86818635bbfe66197af1d86e40cc6996a2ac0542
name: perl-Digest-MD5
arch: s390x
version: 2.59
epoch: 0
release: 5.el10
summary: Perl interface to the MD5 algorithm
url: https://metacpan.org/release/Digest-MD5
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Digest-MD5-2.59-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Digest-MD5-2.59-5.el10.s390x.rpm
checksum_type: sha256
description:
  The Digest::MD5 module allows you to use the RSA Data Security Inc. MD5
  Message Digest algorithm from within Perl programs. The algorithm takes as
  input a message of arbitrary length and produces as output a 128-bit
  "fingerprint" or "message digest" of the input.


pkgId: 677d4b601ba26dfa19b00d7b812f3e41db43e01ada61ef552e1ea4a893e8a033
name: perl-DynaLoader
arch: s390x
version: 1.56
epoch: 0
release: 510.el10
summary: Dynamically load C libraries into Perl code
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-DynaLoader-1.56-510.el10.s390x.rpm
checksum_type: sha256
description:
  The DynaLoader module defines a standard generic interface to the dynamic
  linking mechanisms available on many platforms. Its primary purpose is to
  implement automatic dynamic loading of Perl modules. For a simpler interface,
  see XSLoader module.


pkgId: 804f125f758e660ef1f3a6df51c47c56fb96ab87ebc43691e0ee001aa0d86f63
name: perl-Encode
arch: s390x
version: 3.21
epoch: 4
release: 510.el10
summary: Character encodings in Perl
url: https://metacpan.org/release/Encode
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND Artistic-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Encode-3.21-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Encode-3.21-510.el10.s390x.rpm
checksum_type: sha256
description:
  The Encode module provides the interface between Perl strings and the rest
  of the system. Perl strings are sequences of characters.


pkgId: 5b1e12e13abb0a6ecea2c6e81abc91c88409ee00b9efedd96824c78ade17d4c4
name: perl-Errno
arch: s390x
version: 1.38
epoch: 0
release: 510.el10
summary: System errno constants
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Errno-1.38-510.el10.s390x.rpm
checksum_type: sha256
description:
  "Errno" defines and conditionally exports all the error constants defined in
  your system "errno.h" include file. It has a single export tag, ":POSIX",
  which will export all POSIX defined error numbers.


pkgId: 0270ddd125275836eb61581b2250884c0ab3f617fb3e1a6af98bdf644b9d238c
name: perl-Exporter
arch: noarch
version: 5.78
epoch: 0
release: 510.el10
summary: Implements default import method for modules
url: https://metacpan.org/release/Exporter
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-01.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Exporter-5.78-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Exporter-5.78-510.el10.noarch.rpm
checksum_type: sha256
description:
  The Exporter module implements an import method which allows a module to
  export functions and variables to its users' name spaces. Many modules use
  Exporter rather than implementing their own import method because Exporter
  provides a highly flexible interface, with an implementation optimized for
  the common case.


pkgId: ed42034016a7b12a6778059228b1e6c688035855c37446cab266766596e1cc75
name: perl-File-Path
arch: noarch
version: 2.18
epoch: 0
release: 510.el10
summary: Create or remove directory trees
url: https://metacpan.org/release/File-Path
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-01.stream.rdu2.redhat.com
rpm_sourcerpm: perl-File-Path-2.18-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-File-Path-2.18-510.el10.noarch.rpm
checksum_type: sha256
description:
  This module provides a convenient way to create directories of arbitrary
  depth and to delete an entire directory subtree from the file system.


pkgId: f0cad7454cfcf9f9e9806742c380f0cea697bbec9aa70871aaeaa20fbb1faf4f
name: perl-File-Temp
arch: noarch
version: 0.231.100
epoch: 1
release: 510.el10
summary: Return name and handle of a temporary file safely
url: https://metacpan.org/release/File-Temp
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-File-Temp-0.231.100-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-File-Temp-0.231.100-510.el10.noarch.rpm
checksum_type: sha256
description:
  File::Temp can be used to create and open temporary files in a safe way.
  There is both a function interface and an object-oriented interface. The
  File::Temp constructor or the tempfile() function can be used to return the
  name and the open file handle of a temporary file. The tempdir() function
  can be used to create a temporary directory.


pkgId: 449d79da5d7ff633e54bb9235a6c087655ef3673fdf912786ad102de47f195a7
name: perl-File-stat
arch: noarch
version: 1.14
epoch: 0
release: 510.el10
summary: By-name interface to Perl built-in stat functions
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-File-stat-1.14-510.el10.noarch.rpm
checksum_type: sha256
description:
  This module overrides the core stat() and lstat() functions, replacing them
  with versions that return File::stat objects. This object has methods that
  return the similarly named structure field name from the stat(2) function.


pkgId: 459b6e15428e08e0a101749500356ce174e4d7855f1023a50fbe089f10a4cb42
name: perl-FileHandle
arch: noarch
version: 2.05
epoch: 0
release: 510.el10
summary: Object methods for file handles
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-FileHandle-2.05-510.el10.noarch.rpm
checksum_type: sha256
description:
  This is an object-oriented interface for opening files and performing
  input/output operations on them.


pkgId: 936ece775fb2b204c71a61ce6effcd1a1d8097fe51ac8459e3e4043e55623539
name: perl-Getopt-Long
arch: noarch
version: 2.58
epoch: 1
release: 2.el10
summary: Extended processing of command line options
url: https://metacpan.org/release/Getopt-Long
rpm_license: GPL-2.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-01.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Getopt-Long-2.58-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Getopt-Long-2.58-2.el10.noarch.rpm
checksum_type: sha256
description:
  The Getopt::Long module implements an extended getopt function called
  GetOptions(). It parses the command line from @ARGV, recognizing and removing
  specified options and their possible values.  It adheres to the POSIX syntax
  for command line options, with GNU extensions. In general, this means that
  options have long names instead of single letters, and are introduced with
  a double dash "--". Support for bundling of command line options, as was the
  case with the more traditional single-letter approach, is provided but not
  enabled by default.


pkgId: 2a8012d7136b7b13d2014ed4391e4e5179faf025b3cc68768de87d8c77445b3f
name: perl-Getopt-Std
arch: noarch
version: 1.14
epoch: 0
release: 510.el10
summary: Process single-character switches with switch clustering
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Getopt-Std-1.14-510.el10.noarch.rpm
checksum_type: sha256
description:
  The Getopt::Std module provides functions for processing single-character
  switches with switch clustering. Pass one argument which is a string
  containing all switches to be recognized.


pkgId: 65a691a4b26751e662d1c49973993ab23ff595c0edf5826169d49fab20908762
name: perl-HTTP-Tiny
arch: noarch
version: 0.088
epoch: 0
release: 511.el10
summary: Small, simple, correct HTTP/1.1 client
url: https://metacpan.org/release/HTTP-Tiny
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: perl-HTTP-Tiny-0.088-511.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-HTTP-Tiny-0.088-511.el10.noarch.rpm
checksum_type: sha256
description:
  This is a very simple HTTP/1.1 client, designed for doing simple GET requests
  without the overhead of a large framework like LWP::UserAgent.

  It is more correct and more complete than HTTP::Lite. It supports proxies
  (currently only non-authenticating ones) and redirection. It also correctly
  resumes after EINTR.


pkgId: 5eb8bad2d45a9d7c079ba2f17935b311c07e5be818f557036d06bb53745645db
name: perl-IO-Socket-IP
arch: noarch
version: 0.42
epoch: 0
release: 511.el10
summary: Drop-in replacement for IO::Socket::INET supporting both IPv4 and IPv6
url: https://metacpan.org/release/IO-Socket-IP
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: perl-IO-Socket-IP-0.42-511.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-IO-Socket-IP-0.42-511.el10.noarch.rpm
checksum_type: sha256
description:
  This module provides a protocol-independent way to use IPv4 and IPv6
  sockets, intended as a replacement for IO::Socket::INET. Most constructor
  arguments and methods are provided in a backward-compatible way.


pkgId: 1ca2a8893a74f162e7554feb9949815a75f55bbbb23c09db81eafab14d956a2c
name: perl-IO-Socket-SSL
arch: noarch
version: 2.085
epoch: 0
release: 2.el10
summary: Perl library for transparent SSL
url: https://metacpan.org/release/IO-Socket-SSL
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND MPL-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-03.stream.rdu2.redhat.com
rpm_sourcerpm: perl-IO-Socket-SSL-2.085-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-IO-Socket-SSL-2.085-2.el10.noarch.rpm
checksum_type: sha256
description:
  This module is a true drop-in replacement for IO::Socket::INET that
  uses SSL to encrypt data before it is transferred to a remote server
  or client. IO::Socket::SSL supports all the extra features that one
  needs to write a full-featured SSL client or server application:
  multiple SSL contexts, cipher selection, certificate verification, and
  SSL version selection. As an extra bonus, it works perfectly with
  mod_perl.


pkgId: 37f9a480fd89915428be60cf71b148d57ba61e077716d929591e1f840f15efb2
name: perl-IPC-Open3
arch: noarch
version: 1.22
epoch: 0
release: 510.el10
summary: Open a process for reading, writing, and error handling
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-IPC-Open3-1.22-510.el10.noarch.rpm
checksum_type: sha256
description:
  These are functions that spawn a given command and connects the standard
  output of the command for reading, standard output for writing, and standard
  error output for handling the errors.


pkgId: 4eaff174a6667fb36d5b9581e975750b3ee813f241b802036c2a9341918e458c
name: perl-MIME-Base64
arch: s390x
version: 3.16
epoch: 0
release: 510.el10
summary: Encoding and decoding of Base64 and quoted-printable strings
url: https://metacpan.org/release/MIME-Base64
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND metamail
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-MIME-Base64-3.16-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-MIME-Base64-3.16-510.el10.s390x.rpm
checksum_type: sha256
description:
  This package contains a Base64 encoder/decoder and a quoted-printable
  encoder/decoder. These encoding methods are specified in RFC 2045 - MIME
  (Multipurpose Internet Mail Extensions).


pkgId: 386f2b53fe56cb62e416b9000efcd2859df85a8d05fc5612a2a8b55c80542791
name: perl-Mozilla-CA
arch: noarch
version: 20231213
epoch: 0
release: 4.el10
summary: Mozilla's CA certificate bundle in PEM format
url: https://metacpan.org/release/Mozilla-CA
rpm_license: MPL-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-04.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Mozilla-CA-20231213-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Mozilla-CA-20231213-4.el10.noarch.rpm
checksum_type: sha256
description:
  Mozilla::CA provides a path to ca-certificates copy of Mozilla's bundle of
  certificate authority certificates in a form that can be consumed by modules
  and libraries based on OpenSSL.


pkgId: becc5d12f8fe1541e9863d6674a2678a400a86044a398e198c28effcc68057c3
name: perl-Net-SSLeay
arch: s390x
version: 1.94
epoch: 0
release: 6.el10
summary: Perl extension for using OpenSSL
url: https://metacpan.org/release/Net-SSLeay
rpm_license: Artistic-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Net-SSLeay-1.94-6.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Net-SSLeay-1.94-6.el10.s390x.rpm
checksum_type: sha256
description:
  This module offers some high level convenience functions for accessing
  web pages on SSL servers (for symmetry, same API is offered for
  accessing http servers, too), a sslcat() function for writing your own
  clients, and finally access to the SSL API of SSLeay/OpenSSL package
  so you can write servers or clients for more complicated applications.


pkgId: e68f0d1ca2912f8f2cbcb05bb67fd48ad395ab2f6e0197c3a1dc2d23f55f39ad
name: perl-POSIX
arch: s390x
version: 2.20
epoch: 0
release: 510.el10
summary: Perl interface to IEEE Std 1003.1
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-POSIX-2.20-510.el10.s390x.rpm
checksum_type: sha256
description:
  The POSIX module permits you to access all (or nearly all) the standard POSIX
  1003.1 identifiers. Many of these identifiers have been given Perl interfaces.


pkgId: 65d1e48ad23cc37349fc8c2f13a3a243b950959ac8c42f92513bc0600e8a7ef2
name: perl-Pod-Perldoc
arch: noarch
version: 3.28.01
epoch: 0
release: 511.el10
summary: Look up Perl documentation in Pod format
url: https://metacpan.org/release/Pod-Perldoc
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-04.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Pod-Perldoc-3.28.01-511.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Pod-Perldoc-3.28.01-511.el10.noarch.rpm
checksum_type: sha256
description:
  perldoc looks up a piece of documentation in POD format that is embedded
  in the perl installation tree or in a Perl script, and displays it via
  "groff -man | $PAGER". This is primarily used for the documentation for
  the Perl library modules.


pkgId: e0a7293f93660cd3063f0b001ef189a02b597e461b867cc631a05b28f25f9309
name: perl-Pod-Simple
arch: noarch
version: 3.45
epoch: 1
release: 510.el10
summary: Framework for parsing POD documentation
url: https://metacpan.org/release/Pod-Simple
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Pod-Simple-3.45-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Pod-Simple-3.45-510.el10.noarch.rpm
checksum_type: sha256
description:
  Pod::Simple is a Perl library for parsing text in the POD (plain old
  documentation) markup language that is typically used for writing
  documentation for Perl and for Perl modules.


pkgId: 1c0d3920cc2c3a31bd9e1791a425d402905eb6d797aea6e430dd6fa6d2329ae2
name: perl-Pod-Usage
arch: noarch
version: 2.03
epoch: 4
release: 510.el10
summary: Print a usage message from embedded POD documentation
url: https://metacpan.org/release/Pod-Usage
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-01.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Pod-Usage-2.03-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Pod-Usage-2.03-510.el10.noarch.rpm
checksum_type: sha256
description:
  pod2usage will print a usage message for the invoking script (using its
  embedded POD documentation) and then exit the script with the desired exit
  status. The usage message printed may have any one of three levels of
  "verboseness": If the verbose level is 0, then only a synopsis is printed.
  If the verbose level is 1, then the synopsis is printed along with a
  description (if present) of the command line options and arguments. If the
  verbose level is 2, then the entire manual page is printed.


pkgId: f5c4d3e0302952caf2284a03377ea06188682330a514ba410b5264b664c88cbb
name: perl-Scalar-List-Utils
arch: s390x
version: 1.63
epoch: 5
release: 510.el10
summary: A selection of general-utility scalar and list subroutines
url: https://metacpan.org/release/Scalar-List-Utils
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Scalar-List-Utils-1.63-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Scalar-List-Utils-1.63-510.el10.s390x.rpm
checksum_type: sha256
description:
  This package contains a selection of subroutines that people have expressed
  would be nice to have in the perl core, but the usage would not really be
  high enough to warrant the use of a keyword, and the size so small such
  that being individual extensions would be wasteful.


pkgId: 90d2967dd4c902941ffd4096f19c8c6444009db51e1c9a83dd28f39da1cc1dd5
name: perl-SelectSaver
arch: noarch
version: 1.02
epoch: 0
release: 510.el10
summary: Save and restore selected file handle
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-SelectSaver-1.02-510.el10.noarch.rpm
checksum_type: sha256
description:
  A "SelectSaver" object contains a reference to the file handle that was
  selected when it was created. When the object is destroyed, it re-selects the
  file handle that was selected when it was created.


pkgId: 3c3aee314443c6c710335deb1a1ed4091dbe3a9b6097fc5e698775424e58a31c
name: perl-Socket
arch: s390x
version: 2.038
epoch: 4
release: 510.el10
summary: Networking constants and support functions
url: https://metacpan.org/release/Socket
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Socket-2.038-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Socket-2.038-510.el10.s390x.rpm
checksum_type: sha256
description:
  This Perl module provides a variety of constants, structure manipulators and
  other functions related to socket-based networking. The values and functions
  provided are useful when used in conjunction with Perl core functions such as
  socket(), setsockopt() and bind(). It also provides several other support
  functions, mostly for dealing with conversions of network addresses between
  human-readable and native binary forms, and for hostname resolver operations.


pkgId: e03884b195f98ca2852a88a570ba413a237325992e929f92aa629758ab8bfd88
name: perl-Storable
arch: s390x
version: 3.32
epoch: 1
release: 510.el10
summary: Persistence for Perl data structures
url: https://metacpan.org/release/Storable
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Storable-3.32-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Storable-3.32-510.el10.s390x.rpm
checksum_type: sha256
description:
  The Storable package brings persistence to your Perl data structures
  containing scalar, array, hash or reference objects, i.e. anything that
  can be conveniently stored to disk and retrieved at a later time.


pkgId: 6af6826de69da3033ef62335e939f3408ce646d1bc29ecf210146f62a223d52b
name: perl-Term-ANSIColor
arch: noarch
version: 5.01
epoch: 0
release: 511.el10
summary: Color screen output using ANSI escape sequences
url: https://metacpan.org/release/Term-ANSIColor
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-04.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Term-ANSIColor-5.01-511.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Term-ANSIColor-5.01-511.el10.noarch.rpm
checksum_type: sha256
description:
  This module has two interfaces, one through color() and colored() and the
  other through constants. It also offers the utility functions uncolor(),
  colorstrip(), colorvalid(), and coloralias(), which have to be explicitly
  imported to be used.


pkgId: e2ba1add809531b9eb563d54756282886cea80e51f2b64627ac27647201790ec
name: perl-Term-Cap
arch: noarch
version: 1.18
epoch: 0
release: 510.el10
summary: Perl termcap interface
url: https://metacpan.org/release/Term-Cap
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Term-Cap-1.18-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Term-Cap-1.18-510.el10.noarch.rpm
checksum_type: sha256
description:
  These are low-level functions to extract and use capabilities from a terminal
  capability (termcap) database.


pkgId: 07b324d2bba4dad70540df08d56b44a75e35e11299de5059fdeec2a4e7bf7f95
name: perl-Text-ParseWords
arch: noarch
version: 3.31
epoch: 0
release: 510.el10
summary: Parse text into an array of tokens or array of arrays
url: https://metacpan.org/release/Text-ParseWords
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Text-ParseWords-3.31-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Text-ParseWords-3.31-510.el10.noarch.rpm
checksum_type: sha256
description:
  The nested_quotewords() and quotewords() functions accept a delimiter (which
  can be a regular expression) and a list of lines and then breaks those lines
  up into a list of words ignoring delimiters that appear inside quotes.
  quotewords() returns all of the tokens in a single long list, while
  nested_quotewords() returns a list of token lists corresponding to the
  elements of @lines. parse_line() does tokenizing on a single string. The
  quotewords() functions simply call parse_line(), so if you're only splitting
  one line you can call parse_line() directly and save a function call.


pkgId: a582232bcd1803e360f06e9d6daec81a36806017e70daf79737574c0bd587af6
name: perl-Text-Tabs+Wrap
arch: noarch
version: 2024.001
epoch: 0
release: 510.el10
summary: Expand tabs and do simple line wrapping
url: https://metacpan.org/release/Text-Tabs%2BWrap
rpm_license: TTWL
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-04.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Text-Tabs+Wrap-2024.001-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Text-Tabs+Wrap-2024.001-510.el10.noarch.rpm
checksum_type: sha256
description:
  Text::Tabs performs the same job that the UNIX expand(1) and unexpand(1)
  commands do: adding or removing tabs from a document.

  Text::Wrap::wrap() will reformat lines into paragraphs. All it does is break
  up long lines, it will not join short lines together.


pkgId: 2141e03631879112fdaa79927b142519ce5e42dd2f16b7ca9319a91c13c6aa50
name: perl-Time-Local
arch: noarch
version: 1.350
epoch: 2
release: 510.el10
summary: Efficiently compute time from local and GMT time
url: https://metacpan.org/release/Time-Local
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-04.stream.rdu2.redhat.com
rpm_sourcerpm: perl-Time-Local-1.350-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-Time-Local-1.350-510.el10.noarch.rpm
checksum_type: sha256
description:
  This module provides functions that are the inverse of built-in perl functions
  localtime() and gmtime(). They accept a date as a six-element array, and
  return the corresponding time(2) value in seconds since the system epoch
  (Midnight, January 1, 1970 GMT on Unix, for example). This value can be
  positive or negative, though POSIX only requires support for positive values,
  so dates before the system's epoch may not work on all operating systems.


pkgId: 1ed1f7228daa0082ce705ea494f243aab8aaeee4776cd26a020b17f617f96f99
name: perl-URI
arch: noarch
version: 5.27
epoch: 0
release: 2.el10
summary: A Perl module implementing URI parsing and manipulation
url: https://metacpan.org/release/URI
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-URI-5.27-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-URI-5.27-2.el10.noarch.rpm
checksum_type: sha256
description:
  This module implements the URI class. Objects of this class represent
  "Uniform Resource Identifier references" as specified in RFC 2396 (and
  updated by RFC 2732).


pkgId: ab1d07430a957866f9784d28251bb3e07193e8e3f419216078f1db6e011e7011
name: perl-base
arch: noarch
version: 2.27
epoch: 0
release: 510.el10
summary: Establish an ISA relationship with base classes at compile time
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-base-2.27-510.el10.noarch.rpm
checksum_type: sha256
description:
  "base" module allows you to both load one or more modules, while setting up
  inheritance from those modules at the same time.  Unless you are using the
  "fields" pragma, consider this module discouraged in favor of the
  lighter-weight "parent".


pkgId: efebe27beaef3157d3df785b858c5850857bf5672a45aea0cf8161f37da29eba
name: perl-constant
arch: noarch
version: 1.33
epoch: 0
release: 511.el10
summary: Perl pragma to declare constants
url: https://metacpan.org/release/constant
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-constant-1.33-511.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-constant-1.33-511.el10.noarch.rpm
checksum_type: sha256
description:
  This pragma allows you to declare constants at compile-time:

  use constant PI => 4 * atan2(1, 1);

  When you declare a constant such as "PI" using the method shown above,
  each machine your script runs upon can have as many digits of accuracy
  as it can use. Also, your program will be easier to read, more likely
  to be maintained (and maintained correctly), and far less likely to
  send a space probe to the wrong planet because nobody noticed the one
  equation in which you wrote 3.14195.

  When a constant is used in an expression, Perl replaces it with its
  value at compile time, and may then optimize the expression further.
  In particular, any code in an "if (CONSTANT)" block will be optimized
  away if the constant is false.


pkgId: 5c4c2c54a05f745f2c3bfe86a39d740cd24f74595dff1b9b24cbb771c4316549
name: perl-interpreter
arch: s390x
version: 5.40.0
epoch: 4
release: 510.el10
summary: Standalone executable Perl interpreter
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-interpreter-5.40.0-510.el10.s390x.rpm
checksum_type: sha256
description:
  This is a Perl interpreter as a standalone executable /usr/bin/perl
  required for handling Perl scripts. It does not provide all the other Perl
  modules or tools.

  Install this package if you want to program in Perl or enable your system to
  handle Perl scripts with /usr/bin/perl interpreter.

  If your script requires some Perl modules, you can install them with
  "perl(MODULE)" where "MODULE" is a name of required module. E.g. install
  "perl(Test::More)" to make Test::More Perl module available.

  If you need all the Perl modules that come with upstream Perl sources, so
  called core modules, install perl package.

  If you only need perl run-time as a shared library, i.e. Perl interpreter
  embedded into another application, the only essential package is perl-libs.

  Perl header files can be found in perl-devel package.

  Perl utils like "h2ph" or "perlbug" can be found in perl-utils package.

  Perl debugger, usually invoked with "perl -d", is available in perl-debugger
  package.


pkgId: 6a54d662544c6ec36f92a35fa78020ee9d789f7840252b51d55ba945a808e1d2
name: perl-libnet
arch: noarch
version: 3.15
epoch: 0
release: 510.el10
summary: Perl clients for various network protocols
url: https://metacpan.org/release/libnet
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-01.stream.rdu2.redhat.com
rpm_sourcerpm: perl-libnet-3.15-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-libnet-3.15-510.el10.noarch.rpm
checksum_type: sha256
description:
  This is a collection of Perl modules which provides a simple and
  consistent programming interface (API) to the client side of various
  protocols used in the internet community.


pkgId: b0502180c185ea63a900fa7fa09a6015d311deedca82e9af6c1f2e06f5148e44
name: perl-libs
arch: s390x
version: 5.40.0
epoch: 4
release: 510.el10
summary: The libraries for the perl run-time
description:
  The is a perl run-time (interpreter as a shared library and include
  directories).

url: https://www.perl.org/
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-libs-5.40.0-510.el10.s390x.rpm
checksum_type: sha256
rpm_license:
  (GPL-1.0-or-later OR Artistic-1.0-Perl) AND Martin-Birgmeier AND Spencer-86 AND MIT AND Unicode-3.0 AND LicenseRef-Fedora-Public-Domain


pkgId: b74510b1e1bc8b837ae3625545904d92604c879f8f10c289b72b9ea107bfa269
name: perl-locale
arch: noarch
version: 1.12
epoch: 0
release: 510.el10
summary: Pragma to use or avoid POSIX locales for built-in operations
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-locale-1.12-510.el10.noarch.rpm
checksum_type: sha256
description:
  This pragma tells the compiler to enable (or disable) the use of POSIX locales
  for built-in operations (for example, LC_CTYPE for regular expressions,
  LC_COLLATE for string comparison, and LC_NUMERIC for number formatting). Each
  "use locale" or "no locale" affects statements to the end of the enclosing
  block.


pkgId: 456cf15bf15358653e20f0eae36707512a3a3c4486cb8d3a6cf034f0d22b4490
name: perl-mro
arch: s390x
version: 1.29
epoch: 0
release: 510.el10
summary: Method resolution order
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-mro-1.29-510.el10.s390x.rpm
checksum_type: sha256
description:
  The "mro" name space provides several utilities for dealing with method
  resolution order and method caching in general.


pkgId: 853c5f19281d8cf1f0984fdc4d0f7394662d7f39febd36333996a53fc02f6336
name: perl-overload
arch: noarch
version: 1.37
epoch: 0
release: 510.el10
summary: Overloading Perl operations
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-overload-1.37-510.el10.noarch.rpm
checksum_type: sha256
description:
  The "overload" pragma allows overloading of Perl operators for a class. To
  overload built-in functions, see "Overriding Built-in Functions" in perlsub
  POD instead.


pkgId: 679f7dcbe28731f17260de3eea213a57167ae07fc8d11965721d79c4507abee5
name: perl-parent
arch: noarch
version: 0.241
epoch: 1
release: 510.el10
summary: Establish an ISA relationship with base classes at compile time
url: https://metacpan.org/release/parent
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: perl-parent-0.241-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-parent-0.241-510.el10.noarch.rpm
checksum_type: sha256
description:
  Allows you to both load one or more modules, while setting up inheritance
  from those modules at the same time. Mostly similar in effect to:

  	package Baz;

  	BEGIN {
  		require Foo;
  		require Bar;

  		push @ISA, qw(Foo Bar);
  	}


pkgId: b6429ef4f96a7bbba9e23d2bc8dbfdef8dab6e55a6b3bbf82811fe702c325194
name: perl-podlators
arch: noarch
version: 5.01
epoch: 1
release: 510.el10
summary: Format POD source into various output formats
url: https://metacpan.org/release/podlators
rpm_license: (GPL-1.0-or-later OR Artistic-1.0-Perl) AND FSFAP
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-podlators-5.01-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-podlators-5.01-510.el10.noarch.rpm
checksum_type: sha256
description:
  This package contains Pod::Man and Pod::Text modules which convert POD input
  to *roff source output, suitable for man pages, or plain text.  It also
  includes several sub-classes of Pod::Text for formatted output to terminals
  with various capabilities.


pkgId: 00f9677308a494a3b8aeaabd676efeb16f126765e090e4f0db63391908a6f57a
name: perl-vars
arch: noarch
version: 1.05
epoch: 0
release: 510.el10
summary: Perl pragma to predeclare global variable names
url: https://www.perl.org/
rpm_license: GPL-1.0-or-later OR Artistic-1.0-Perl
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: perl-5.40.0-510.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/perl-vars-1.05-510.el10.noarch.rpm
checksum_type: sha256
description:
  This pragma will predeclare all the variables whose names are in the
  list, allowing you to use them under "use strict", and disabling any
  typo warnings for them.

  For use with variables in the current package for a single scope, the
  functionality provided by this pragma has been superseded by "our"
  declarations, available in Perl v5.6.0 or later, and use of this pragma is
  discouraged.


pkgId: 8cda5de0087f322464bd1b288eab0698919a362ac0ec6e5e26be0a7e1e077a80
name: pigz
arch: s390x
version: 2.8
epoch: 0
release: 7.el10
summary: Parallel implementation of gzip
url: https://www.zlib.net/pigz/
rpm_license: Zlib
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: pigz-2.8-7.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pigz-2.8-7.el10.s390x.rpm
checksum_type: sha256
description:
  pigz, which stands for parallel implementation of gzip,
  is a fully functional replacement for gzip that exploits
  multiple processors and multiple cores to the hilt when
  compressing data.


pkgId: 639d77b49cff928a720704917bcd6dc09c54d06c4b2110ba4706d465d3931e5e
name: pkcs11-provider
arch: s390x
version: 0.5
epoch: 0
release: 3.el10
summary: A PKCS#11 provider for OpenSSL 3.0+
url: https://github.com/latchset/pkcs11-provider
rpm_license: Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: pkcs11-provider-0.5-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pkcs11-provider-0.5-3.el10.s390x.rpm
checksum_type: sha256
description:
  This is an Openssl 3.x provider to access Hardware or Software Tokens using
  the PKCS#11 Cryptographic Token Interface.
  This code targets version 3.0 of the interface but should be backwards
  compatible to previous versions as well.


pkgId: 5c2fd6f797419782d84f54952597bdb15d912f142837b498aaf9c42d289c4ae5
name: pkgconf
arch: s390x
version: 2.1.0
epoch: 0
release: 2.el10
summary: Package compiler and linker metadata toolkit
url: http://pkgconf.org/
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: pkgconf-2.1.0-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pkgconf-2.1.0-2.el10.s390x.rpm
checksum_type: sha256
description:
  pkgconf is a program which helps to configure compiler and linker flags
  for development frameworks. It is similar to pkg-config from freedesktop.org
  and handles .pc files in a similar manner as pkg-config.


pkgId: 0b36930bfae69659c36e95355b769d80962798062465fd5845167dd18673fa60
name: pkgconf-m4
arch: noarch
version: 2.1.0
epoch: 0
release: 2.el10
summary: m4 macros for pkgconf
url: http://pkgconf.org/
rpm_license: GPLv2+ with exceptions
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: pkgconf-2.1.0-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pkgconf-m4-2.1.0-2.el10.noarch.rpm
checksum_type: sha256
description:
  This package includes m4 macros used to support PKG_CHECK_MODULES
  when using pkgconf with autotools.


pkgId: f8e762870760ef8177429adc1cfda04544ed96515a96b5c4ee97f56bdb9a02ce
name: pkgconf-pkg-config
arch: s390x
version: 2.1.0
epoch: 0
release: 2.el10
summary: pkgconf shim to provide /usr/bin/pkg-config
url: http://pkgconf.org/
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: pkgconf-2.1.0-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/pkgconf-pkg-config-2.1.0-2.el10.s390x.rpm
checksum_type: sha256
description:
  This package provides the shim links for pkgconf to be automatically
  used in place of pkgconfig. This ensures that pkgconf is used as
  the system provider of pkg-config.


pkgId: 6d74d476c2aff65b56644e20065e4fbf09d49449c6e58c69b80808bfc2c7e5b1
name: plocate
arch: s390x
version: 1.1.22
epoch: 0
release: 10.el10
summary: Much faster locate
url: https://plocate.sesse.net/
rpm_license: GPL-2.0-or-later AND GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: plocate-1.1.22-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/plocate-1.1.22-10.el10.s390x.rpm
checksum_type: sha256
description:
  plocate is a locate(1) based on posting lists, giving much faster
  searches on a much smaller index. It is a drop-in replacement for
  mlocate in nearly all aspects, and is fast on SSDs and non-SSDs alike.


pkgId: b33b595422bdb42604dbfcd53d4ecc449b3d8fa954425162bd72034c5af688df
name: policycoreutils
arch: s390x
version: 3.10
epoch: 0
release: 1.el10
summary: SELinux policy core utilities
url: https://github.com/SELinuxProject/selinux
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: policycoreutils-3.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/policycoreutils-3.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  Security-enhanced Linux is a feature of the Linux® kernel and a number
  of utilities with enhanced security functionality designed to add
  mandatory access controls to Linux.  The Security-enhanced Linux
  kernel contains new architectural components originally developed to
  improve the security of the Flask operating system. These
  architectural components provide general support for the enforcement
  of many kinds of mandatory access control policies, including those
  based on the concepts of Type Enforcement®, Role-based Access
  Control, and Multi-level Security.

  policycoreutils contains the policy core utilities that are required
  for basic operation of a SELinux system.  These utilities include
  load_policy to load policies, setfiles to label filesystems, newrole
  to switch roles.


pkgId: 0833c22200b0a8e0d9769d9de6165521c8e89e309f70db345f740e26689a5bdc
name: policycoreutils-newrole
arch: s390x
version: 3.10
epoch: 0
release: 1.el10
summary: The newrole application for RBAC/MLS
url: https://github.com/SELinuxProject/selinux
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: policycoreutils-3.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/policycoreutils-newrole-3.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  RBAC/MLS policy machines require newrole as a way of changing the role
  or level of a logged in user.


pkgId: b80b796e280e311588d06e1139b156fbf4014886b6d8fc6cf4b66c8f91989730
name: policycoreutils-python-utils
arch: noarch
version: 3.10
epoch: 0
release: 2.el10
summary: SELinux policy core python utilities
url: https://github.com/SELinuxProject/selinux
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: policycoreutils-3.10-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/policycoreutils-python-utils-3.10-2.el10.noarch.rpm
checksum_type: sha256
description:
  The policycoreutils-python-utils package contains the management tools use to manage
  an SELinux environment.


pkgId: dfc213ac2d2a0bb70c2ae019a3db91ebd3908aa755c7f921d6c46ff51edab52e
name: polkit
arch: s390x
version: 124
epoch: 0
release: 3.el10
summary: An authorization framework
url: https://github.com/polkit-org/polkit
rpm_license: LGPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: polkit-124-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/polkit-124-3.el10.s390x.rpm
checksum_type: sha256
description:
  polkit is a toolkit for defining and handling authorizations.  It is
  used for allowing unprivileged processes to speak to privileged
  processes.


pkgId: 41204827a7996458a312cc350580a834fda1e5346059ecf121a805e007bd022d
name: polkit-pkla-compat
arch: s390x
version: 0.1
epoch: 0
release: 29.el10
summary: Rules for polkit to add compatibility with pklocalauthority
url: https://pagure.io/polkit-pkla-compat
rpm_license: LGPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: polkit-pkla-compat-0.1-29.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/polkit-pkla-compat-0.1-29.el10.s390x.rpm
checksum_type: sha256
description:
  A polkit JavaScript rule and associated helpers that mostly provide
  compatibility with the .pkla file format supported in polkit <= 0.105 for users
  of later polkit releases.


pkgId: ae322a37b8a441635a6ca62e8dc7eafd2ff9b0cc0bb8bef6f546b8d4968cd43d
name: popt
arch: s390x
version: 1.19
epoch: 0
release: 7.el10
summary: C library for parsing command line parameters
url: https://github.com/rpm-software-management/popt/
rpm_license: MIT AND LicenseRef-Fedora-Public-Domain
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: popt-1.19-7.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/popt-1.19-7.el10.s390x.rpm
checksum_type: sha256
description:
  Popt is a C library for parsing command line parameters. Popt was
  heavily influenced by the getopt() and getopt_long() functions, but
  it improves on them by allowing more powerful argument expansion.
  Popt can parse arbitrary argv[] style arrays and automatically set
  variables based on command line arguments. Popt allows command line
  arguments to be aliased via configuration files and includes utility
  functions for parsing arbitrary strings into argv[] arrays using
  shell-like rules.


pkgId: 1945dfc388a70a30c3d966c6acfc7f104a441d0375b7075f78a57025675b028b
name: ppp
arch: s390x
version: 2.5.0
epoch: 0
release: 12.el10
summary: The Point-to-Point Protocol daemon
url: http://www.samba.org/ppp
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: ppp-2.5.0-12.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/ppp-2.5.0-12.el10.s390x.rpm
checksum_type: sha256
description:
  The ppp package contains the PPP (Point-to-Point Protocol) daemon and
  documentation for PPP support. The PPP protocol provides a method for
  transmitting datagrams over serial point-to-point links. PPP is
  usually used to dial in to an ISP (Internet Service Provider) or other
  organization over a modem and phone line.

rpm_license:
  bsd-3-clause AND zlib AND licenseref-fedora-public-domain AND bsd-attribution-hpnd-disclaimer AND bsd-4.3tahoe AND bsd-4-clause-uc AND apache-2.0 AND lgpl-2.0-or-later AND (gpl-2.0-or-later OR bsd-2-clause OR bsd-3-clause OR bsd-4-clause) AND gpl-2.0-or-later AND xlock AND gpl-1.0-or-later AND mackerras-3-clause-acknowledgment AND mackerras-3-clause AND hpnd-fenneberg-Livingston AND sun-ppp AND hpnd-inria-imag AND sun-ppp-2000


pkgId: f1495ad3d30b26ac57ca426afc269273a2c8b8fcab3038f89562cbb01ac8a46d
name: procps-ng
arch: s390x
version: 4.0.4
epoch: 0
release: 11.el10
summary: System and process monitoring utilities
url: https://sourceforge.net/projects/procps-ng/
rpm_license: GPL-2.0-or-later AND LGPL-2.0-or-later AND LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: procps-ng-4.0.4-11.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/procps-ng-4.0.4-11.el10.s390x.rpm
checksum_type: sha256
description:
  The procps package contains a set of system utilities that provide
  system information. Procps includes ps, free, skill, pkill, pgrep,
  snice, tload, top, uptime, vmstat, pidof, pmap, slabtop, w, watch,
  pwdx and pidwait.
  The ps command displays a snapshot of running processes. The top command
  provides a repetitive update of the statuses of running processes.
  The free command displays the amounts of free and used memory on your
  system. The skill command sends a terminate command (or another
  specified signal) to a specified set of processes. The snice
  command is used to change the scheduling priority of specified
  processes. The tload command prints a graph of the current system
  load average to a specified tty. The uptime command displays the
  current time, how long the system has been running, how many users
  are logged on, and system load averages for the past one, five,
  and fifteen minutes. The w command displays a list of the users
  who are currently logged on and what they are running. The watch
  program watches a running program. The vmstat command displays
  virtual memory statistics about processes, memory, paging, block
  I/O, traps, and CPU activity. The pwdx command reports the current
  working directory of a process or processes. The pidwait command
  waits for processes of specified names.


pkgId: 431c1a40428586302f1b440277ce05ee0139b52f6caac77d79c3effdddd43267
name: protobuf-c
arch: s390x
version: 1.5.0
epoch: 0
release: 5.el10
summary: C bindings for Google's Protocol Buffers
url: https://github.com/protobuf-c/protobuf-c
rpm_license: BSD-2-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: protobuf-c-1.5.0-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/protobuf-c-1.5.0-5.el10.s390x.rpm
checksum_type: sha256
description:
  Protocol Buffers are a way of encoding structured data in an efficient yet
  extensible format. This package provides a code generator and run-time
  libraries to use Protocol Buffers from pure C (not C++).

  It uses a modified version of protoc called protoc-c.


pkgId: 5e9f2d78a5104d99efb5f9f97af7cf7bd04c2a3f29c29b8234779967fe205a34
name: psacct
arch: s390x
version: 6.6.4
epoch: 0
release: 22.el10
summary: Utilities for monitoring process activities
url: http://www.gnu.org/software/acct/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: psacct-6.6.4-22.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/psacct-6.6.4-22.el10.s390x.rpm
checksum_type: sha256
description:
  The psacct package contains several utilities for monitoring process
  activities, including ac, lastcomm, accton and sa. The ac command
  displays statistics about how long users have been logged on. The
  lastcomm command displays information about previous executed
  commands. The accton command turns process accounting on or off. The
  sa command summarizes information about previously executed
  commands.


pkgId: 5508666647e8835f74ae34ea514df1a7e53488e8e59d141f87d2817b5496e871
name: psmisc
arch: s390x
version: 23.6
epoch: 0
release: 7.el10
summary: Utilities for managing processes on your system
url: https://gitlab.com/psmisc/psmisc
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: psmisc-23.6-7.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/psmisc-23.6-7.el10.s390x.rpm
checksum_type: sha256
description:
  The psmisc package contains utilities for managing processes on your
  system: pstree, killall, fuser and pslog.  The pstree command displays
  a tree structure of all of the running processes on your system.  The
  killall command sends a specified signal (SIGTERM if nothing is specified)
  to processes identified by name.  The fuser command identifies the PIDs
  of processes that are using specified files or filesystems. The pslog
  command shows the path of log files owned by a given process.


pkgId: 411b2b627644ed94b965ff1d911c99b39d12fa26bef7d20aced56a78125b80a8
name: publicsuffix-list-dafsa
arch: noarch
version: 20240107
epoch: 0
release: 4.el10
summary: Cross-vendor public domain suffix database in DAFSA form
url: https://publicsuffix.org/
rpm_license: MPL-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-02.stream.rdu2.redhat.com
rpm_sourcerpm: publicsuffix-list-20240107-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/publicsuffix-list-dafsa-20240107-4.el10.noarch.rpm
checksum_type: sha256
description:
  The Public Suffix List is a cross-vendor initiative to provide
  an accurate list of domain name suffixes, maintained by the hard work
  of Mozilla volunteers and by submissions from registries.
  Software using the Public Suffix List will be able to determine where
  cookies may and may not be set, protecting the user from being
  tracked across sites.

  This package includes a DAFSA representation of the Public Suffix List
  for runtime loading.


pkgId: 7fab7a052fb7de267b3c3e5c706e14af55f1d835c188b7d1c9c3a005afbf8b21
name: python3
arch: s390x
version: 3.12.12
epoch: 0
release: 2.el10
summary: Python 3.12 interpreter
url: https://www.python.org/
rpm_license: Python-2.0.1
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: python3.12-3.12.12-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-3.12.12-2.el10.s390x.rpm
checksum_type: sha256
description:
  Python 3.12 is an accessible, high-level, dynamically typed, interpreted
  programming language, designed with an emphasis on code readability.
  It includes an extensive standard library, and has a vast ecosystem of
  third-party libraries.

  The python3 package provides the "python3" executable: the reference
  interpreter for the Python language, version 3.
  The majority of its standard library is provided in the python3-libs package,
  which should be installed automatically along with python3.
  The remaining parts of the Python standard library are broken out into the
  python3-tkinter and python3-test packages, which may need to be installed
  separately.

  Documentation for Python is provided in the python3-docs package.

  Packages containing additional libraries for Python are generally named with
  the "python3-" prefix.


pkgId: db65f2b7315133b23a5b5ca2bba987d9ca7036038857fc1b3cb6ebf7a8c0739f
name: python3-attrs
arch: noarch
version: 23.2.0
epoch: 0
release: 7.el10
summary: Python attributes without boilerplate
url: http://www.attrs.org/
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: python-attrs-23.2.0-7.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-attrs-23.2.0-7.el10.noarch.rpm
checksum_type: sha256
description:
  attrs is an MIT-licensed Python package with class decorators that
  ease the chores of implementing the most common attribute-related
  object protocols.


pkgId: 6949e2d77d9953382deaba4f7555f7e8a6e5579b3fcb6e8420cacd6c03b94756
name: python3-audit
arch: s390x
version: 4.0.3
epoch: 0
release: 5.el10
summary: Python3 bindings for libaudit
url: https://github.com/linux-audit/audit-userspace/
rpm_license: LGPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: audit-4.0.3-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-audit-4.0.3-5.el10.s390x.rpm
checksum_type: sha256
description:
  The python3-audit package contains the bindings so that libaudit
  and libauparse can be used by python3.


pkgId: 179b07dc13e93139714415174991865e89097ad40b50cab6aaa477c9fd8361ce
name: python3-cffi
arch: s390x
version: 1.16.0
epoch: 0
release: 5.el10
summary: Foreign Function Interface for Python to call C code
url: https://github.com/python-cffi/cffi
rpm_license: MIT AND PSF-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: python-cffi-1.16.0-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-cffi-1.16.0-5.el10.s390x.rpm
checksum_type: sha256
description:
  Foreign Function Interface for Python, providing a convenient and
  reliable way of calling existing C code from Python. The interface is
  based on LuaJIT’s FFI.


pkgId: aa834e233ed1d07556d5a8fb17d7ccb3807cacb95d4630943f27f7347cdc8465
name: python3-charset-normalizer
arch: noarch
version: 3.3.2
epoch: 0
release: 4.el10
summary: The Real First Universal Charset Detector
url: https://github.com/ousret/charset_normalizer
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-01.stream.rdu2.redhat.com
rpm_sourcerpm: python-charset-normalizer-3.3.2-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-charset-normalizer-3.3.2-4.el10.noarch.rpm
checksum_type: sha256
description:
  A library that helps you read text from an unknown charset encoding.
  Motivated by chardet, trying to resolve the issue by taking
  a new approach. All IANA character set names for which the Python core
  library provides codecs are supported.


pkgId: 47c4d194cbd58e9307998e392ffea309e746838cb025b3a8483c89f9ce88ea9a
name: python3-cloud-what
arch: s390x
version: 1.30.10
epoch: 0
release: 1.el10
summary: Python package for detection of public cloud provider
url: http://www.candlepinproject.org/
rpm_license: GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: subscription-manager-1.30.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-cloud-what-1.30.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  This package contains a Python module for detection and collection of public
  cloud metadata and signatures.


pkgId: 56c7171271a9509de173e9669364f185b1e594eaba4c6fbc0bfacdab41657839
name: python3-cryptography
arch: s390x
version: 41.0.7
epoch: 0
release: 2.el10
summary: PyCA's cryptography library
url: https://cryptography.io/en/latest/
rpm_license: (Apache-2.0 OR BSD-3-Clause) AND PSF-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: python-cryptography-41.0.7-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-cryptography-41.0.7-2.el10.s390x.rpm
checksum_type: sha256
description:
  cryptography is a package designed to expose cryptographic primitives and
  recipes to Python developers.


pkgId: cfb330bd1a894b34453dca45b016ae495ee6c5b0812f47d6323bf7c0313ae415
name: python3-dateutil
arch: noarch
version: 2.8.2
epoch: 1
release: 14.el10
summary: Powerful extensions to the standard datetime module
url: https://github.com/dateutil/dateutil
rpm_license: (Apache-2.0 AND BSD-3-Clause) OR BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: python-dateutil-2.8.2-14.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-dateutil-2.8.2-14.el10.noarch.rpm
checksum_type: sha256
description:
  The dateutil module provides powerful extensions to the standard datetime
  module available in Python.


pkgId: 47ad55423ef966361fbb2b61723effbd67da81ec9bc791466d4f8a302c905e0e
name: python3-decorator
arch: noarch
version: 5.1.1
epoch: 0
release: 11.el10
summary: Module to simplify usage of decorators in python3
url: https://github.com/micheles/decorator
rpm_license: BSD-2-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: python-decorator-5.1.1-11.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-decorator-5.1.1-11.el10.noarch.rpm
checksum_type: sha256
description:
  The aim of the decorator module is to simplify the usage of decorators for
  the average programmer, and to popularize decorators usage giving examples
  of useful decorators, such as memoize, tracing, redirecting_stdout, locked,
  etc.  The core of this module is a decorator factory called decorator.


pkgId: 27a9a36b6c0032b9e9dce3c10b4e7d4a28e772b9d9004273e21b43d0c162dd1b
name: python3-distro
arch: noarch
version: 1.9.0
epoch: 0
release: 5.el10
summary: Linux Distribution - a Linux OS platform information API
url: https://github.com/python-distro/distro
rpm_license: Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-03.stream.rdu2.redhat.com
rpm_sourcerpm: python-distro-1.9.0-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-distro-1.9.0-5.el10.noarch.rpm
checksum_type: sha256
description:
  The distro (for: Linux Distribution) package provides information about the
  Linux distribution it runs on, such as a reliable machine-readable ID, or
  version information.

  It is a renewed alternative implementation for Python's original
  platform.linux_distribution function, but it also provides much more
  functionality. An alternative implementation became necessary because
  Python 3.5 deprecated this function, and Python 3.7 is expected to remove it
  altogether. Its predecessor function platform.dist was already deprecated since
  Python 2.6 and is also expected to be removed in Python 3.7. Still, there are
  many cases in which access to that information is needed. See Python issue 1322
  for more information.


pkgId: 7a8ce3c768ae08b32af545c42a7c476940862d103df72b216b5611538a4ddb5e
name: python3-dnf-plugin-post-transaction-actions
arch: noarch
version: 4.7.0
epoch: 0
release: 10.el10
summary: Post transaction actions Plugin for DNF
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: dnf-plugins-core-4.7.0-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-dnf-plugin-post-transaction-actions-4.7.0-10.el10.noarch.rpm
checksum_type: sha256
description:
  Post transaction actions Plugin for DNF, Python 3 version. Plugin runs actions
  (shell commands) after transaction is completed. Actions are defined in action
  files.


pkgId: d4df165b5f84b07d8cd7545b8ecd2cd212af1eb679f1d8be1caafc0795f83e07
name: python3-dnf-plugin-pre-transaction-actions
arch: noarch
version: 4.7.0
epoch: 0
release: 10.el10
summary: Pre transaction actions Plugin for DNF
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: dnf-plugins-core-4.7.0-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-dnf-plugin-pre-transaction-actions-4.7.0-10.el10.noarch.rpm
checksum_type: sha256
description:
  Pre transaction actions Plugin for DNF, Python 3 version. Plugin runs actions
  (shell commands) before transaction is completed. Actions are defined in action
  files.


pkgId: 3b9fc3e3a6ec5b21f8ebe86cc97599b7b896f482e3a19f0e807c555e07c467c6
name: python3-dnf-plugin-versionlock
arch: noarch
version: 4.7.0
epoch: 0
release: 10.el10
summary: Version Lock Plugin for DNF
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: dnf-plugins-core-4.7.0-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-dnf-plugin-versionlock-4.7.0-10.el10.noarch.rpm
checksum_type: sha256
description:
  Version lock plugin takes a set of name/versions for packages and excludes all other
  versions of those packages. This allows you to e.g. protect packages from being
  updated by newer versions.


pkgId: 8096ae7f0de60899ddb2d4d00cab91f5ce125564a5d327c26ed3538e16f02808
name: python3-dnf-plugins-core
arch: noarch
version: 4.7.0
epoch: 0
release: 10.el10
summary: Core Plugins for DNF
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: dnf-plugins-core-4.7.0-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-dnf-plugins-core-4.7.0-10.el10.noarch.rpm
checksum_type: sha256
description:
  Core Plugins for DNF, Python 3 interface. This package enhances DNF with builddep,
  config-manager, copr, debuginfo-install, download, needs-restarting,
  groups-manager, repoclosure, repograph, repomanage, reposync, changelog,
  repodiff, system-upgrade, offline-upgrade and offline-distrosync commands.
  Additionally provides generate_completion_cache passive plugin.


pkgId: d03906c873e43c0cb74b4e221ddafc31f08aaa05b81638a35f4d7c637233e9e8
name: python3-dns
arch: noarch
version: 2.5.0
epoch: 0
release: 3.el10
summary: DNS toolkit for Python
url: http://www.dnspython.org
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-03.stream.rdu2.redhat.com
rpm_sourcerpm: python-dns-2.5.0-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-dns-2.5.0-3.el10.noarch.rpm
checksum_type: sha256
description:
  dnspython is a DNS toolkit for Python. It supports almost all record
  types. It can be used for queries, zone transfers, and dynamic
  updates. It supports TSIG authenticated messages and EDNS0.

  dnspython provides both high and low level access to DNS. The high
  level classes perform queries for data of a given name, type, and
  class, and return an answer set. The low level classes allow direct
  manipulation of DNS zones, messages, names, and records.


pkgId: 334000f4d75202b164ac2f218fc940536a56ce33b55ef9927e53b90370b50570
name: python3-gobject-base
arch: s390x
version: 3.46.0
epoch: 0
release: 6.el10
summary: Python 3 bindings for GObject Introspection base package
url: https://wiki.gnome.org/Projects/PyGObject
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: pygobject3-3.46.0-6.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-gobject-base-3.46.0-6.el10.s390x.rpm
checksum_type: sha256
description:
  This package provides the non-cairo specific bits of the GObject Introspection
  library that are architecture specific.


pkgId: 4897c363a054f7ef9277bf2ce1f29deac3646fada62e810c56adb589a27e1e4e
name: python3-gobject-base-noarch
arch: noarch
version: 3.46.0
epoch: 0
release: 6.el10
summary: Python 3 bindings for GObject Introspection base (not architecture dependent)
url: https://wiki.gnome.org/Projects/PyGObject
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-03.stream.rdu2.redhat.com
rpm_sourcerpm: pygobject3-3.46.0-6.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-gobject-base-noarch-3.46.0-6.el10.noarch.rpm
checksum_type: sha256
description:
  This package provides the non-cairo specific bits of the GObject Introspection
  library that are not architecture specific.


pkgId: 4881457f6eeae87b3db86582e7679d6d80d53fb72a7b9724498505b89d13c0f0
name: python3-idna
arch: noarch
version: 3.7
epoch: 0
release: 2.el10
summary: Internationalized Domain Names in Applications (IDNA)
url: https://github.com/kjd/idna
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: python-idna-3.7-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-idna-3.7-2.el10.noarch.rpm
checksum_type: sha256
description:
  A library to support the Internationalised Domain Names in Applications (IDNA)
  protocol as specified in RFC 5891 <http://tools.ietf.org/html/rfc5891>.  This
  version of the protocol is often referred to as "IDNA2008" and can produce
  different results from the earlier standard from 2003.

  The library is also intended to act as a suitable drop-in replacement for the
  "encodings.idna" module that comes with the Python standard library but
  currently only supports the older 2003 specification.


pkgId: 7114d571050f23eceb2af032c298ade2e4b38924709b92b3e1084e3b71d0c791
name: python3-iniparse
arch: noarch
version: 0.5
epoch: 0
release: 10.el10
summary: Accessing and Modifying INI files
url: https://github.com/candlepin/python-iniparse
rpm_license: MIT and Python
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-04.stream.rdu2.redhat.com
rpm_sourcerpm: python-iniparse-0.5-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-iniparse-0.5-10.el10.noarch.rpm
checksum_type: sha256
description:
  iniparse is an INI parser for Python which is API compatible with the standard
  library’s ConfigParser, preserves structure of INI files (order of sections &
  options, indentation, comments, and blank lines are preserved when data is
  updated), and is more convenient to use.


pkgId: 78684b6ec41acfe50f53a9e631b34e45b81aa5231616dfe0b2fd43472489f760
name: python3-inotify
arch: noarch
version: 0.9.6
epoch: 0
release: 35.el10
summary: Monitor filesystem events with Python under Linux
url: https://github.com/seb-m/pyinotify
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-04.stream.rdu2.redhat.com
rpm_sourcerpm: python-inotify-0.9.6-35.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-inotify-0.9.6-35.el10.noarch.rpm
checksum_type: sha256
description:
  This is a Python module for watching filesystems changes. pyinotify
  can be used for various kind of fs monitoring. Based on inotify which
  is an event-driven notifier, where notifications are exported from
  kernel space to user space.


pkgId: b00b389f70b05f7d7e91fbcbd2bdb15e6de674a848e8e402e1c178238f21f579
name: python3-jsonschema
arch: noarch
version: 4.19.1
epoch: 0
release: 7.el10
summary: Implementation of JSON Schema validation for Python
url: https://github.com/Julian/jsonschema
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-02.stream.rdu2.redhat.com
rpm_sourcerpm: python-jsonschema-4.19.1-7.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-jsonschema-4.19.1-7.el10.noarch.rpm
checksum_type: sha256
description:
  jsonschema is an implementation of JSON Schema for Python (supporting
  2.7+, including Python 3).

   - Full support for Draft 7, Draft 6, Draft 4 and Draft 3
   - Lazy validation that can iteratively report all validation errors.
   - Small and extensible
   - Programmatic querying of which properties or items failed validation.


pkgId: fd22c223552228850c374b90cf8a2879f011df6dd25df3c46b4531b33eacaf53
name: python3-jsonschema-specifications
arch: noarch
version: 2023.11.2
epoch: 0
release: 6.el10
summary: JSON Schema meta-schemas and vocabularies, exposed as a Registry
url: https://github.com/python-jsonschema/jsonschema-specifications
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-01.stream.rdu2.redhat.com
rpm_sourcerpm: python-jsonschema-specifications-2023.11.2-6.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-jsonschema-specifications-2023.11.2-6.el10.noarch.rpm
checksum_type: sha256
description:
  JSON support files from the JSON Schema Specifications (metaschemas,
  vocabularies, etc.), packaged for runtime access from Python as a
  referencing-based Schema Registry.


pkgId: c508ce5492ba97d9443d95c4e0fdfb0d8586544f2ff3862a97fb0427952fea83
name: python3-libipa_hbac
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: Python3 bindings for the FreeIPA HBAC Evaluator library
url: https://github.com/SSSD/sssd/
rpm_license: LGPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-libipa_hbac-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  The python3-libipa_hbac contains the bindings so that libipa_hbac can be
  used by Python applications.


pkgId: eb94b33152d4345a9513093d3ba5ac93cb12d94d772a6ecdcc2a38798c7323d3
name: python3-libs
arch: s390x
version: 3.12.12
epoch: 0
release: 2.el10
summary: Python runtime libraries
url: https://www.python.org/
rpm_license: Python-2.0.1 AND CC0-1.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: python3.12-3.12.12-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-libs-3.12.12-2.el10.s390x.rpm
checksum_type: sha256
description:
  This package contains runtime libraries for use by Python:
  - the majority of the Python standard library
  - a dynamically linked library for use by applications that embed Python as
    a scripting language, and by the main "python3" executable


pkgId: 548cf266d34b396762ef6877b9453d8082e334ce071580d00d2c34820491c3a6
name: python3-libsemanage
arch: s390x
version: 3.10
epoch: 0
release: 1.el10
summary: semanage python 3 bindings for libsemanage
url: https://github.com/SELinuxProject/selinux/wiki
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: libsemanage-3.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-libsemanage-3.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  The libsemanage-python3 package contains the python 3 bindings for developing
  SELinux management applications.


pkgId: 5687fafee62663065b53ec59614eb00ae3d9b7f9f7d362c7f0ce9b612690d73a
name: python3-libsss_nss_idmap
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: Python3 bindings for libsss_nss_idmap
url: https://github.com/SSSD/sssd/
rpm_license: LGPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-libsss_nss_idmap-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  The python3-libsss_nss_idmap contains the bindings so that libsss_nss_idmap can
  be used by Python applications.


pkgId: 524a380f8c585ee895a9256797f43f9a93c4897ed6fca0846eba23aa3b2f3ced
name: python3-libxml2
arch: s390x
version: 2.12.5
epoch: 0
release: 10.el10
summary: Python 3 bindings for the libxml2 library
url: https://gitlab.gnome.org/GNOME/libxml2/-/wikis/home
rpm_license: MIT AND ISC-Veillard AND W3C
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: libxml2-2.12.5-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-libxml2-2.12.5-10.el10.s390x.rpm
checksum_type: sha256
description:
  The libxml2-python3 package contains a Python 3 module that permits
  applications written in the Python programming language, version 3, to use the
  interface supplied by the libxml2 library to manipulate XML files.

  This library allows to manipulate XML files. It includes support
  to read, modify and write XML and HTML files. There is DTDs support
  this includes parsing and validation even with complex DTDs, either
  at parse time or later once the document has been modified.


pkgId: ef3eaee301ec5aedcbc06c48226d7fcaabfd37f4078b54bbfbd2389c41060333
name: python3-markdown
arch: noarch
version: 3.5.1
epoch: 0
release: 4.el10
summary: Markdown implementation in Python
url: https://python-markdown.github.io/
rpm_license: BSD
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-03.stream.rdu2.redhat.com
rpm_sourcerpm: python-markdown-3.5.1-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-markdown-3.5.1-4.el10.noarch.rpm
checksum_type: sha256
description:
  This is a Python implementation of John Gruber’s Markdown. It is
  almost completely compliant with the reference implementation, though
  there are a few very minor differences.


pkgId: 908d26d375f989973f178853d6cddb98da6c8d87e1c22a4a923ac82995fb9598
name: python3-packaging
arch: noarch
version: 23.2
epoch: 0
release: 5.el10
summary: Core utilities for Python packages
url: https://github.com/pypa/packaging
rpm_license: BSD-2-Clause OR Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-02.stream.rdu2.redhat.com
rpm_sourcerpm: python-packaging-23.2-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-packaging-23.2-5.el10.noarch.rpm
checksum_type: sha256
description:
  python-packaging provides core utilities for Python packages like utilities for
  dealing with versions, specifiers, markers etc.


pkgId: 4a0011565235492c2199f03075c5fe74478e081d09949d9e4719707e641205f9
name: python3-pexpect
arch: noarch
version: 4.9.0
epoch: 0
release: 5.el10
summary: Unicode-aware Pure Python Expect-like module
url: https://github.com/pexpect/pexpect
rpm_license: ISC AND BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: python-pexpect-4.9.0-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-pexpect-4.9.0-5.el10.noarch.rpm
checksum_type: sha256
description:
  Pexpect is a pure Python module for spawning child applications; controlling
  them; and responding to expected patterns in their output. Pexpect works like
  Don Libes' Expect. Pexpect allows your script to spawn a child application and
  control it as if a human were typing commands. This package contains the
  python3 version of this module.

  Pexpect can be used for automating interactive applications such as ssh, ftp,
  passwd, telnet, etc. It can be used to automate setup scripts for duplicating
  software package installations on different servers. And it can be used for
  automated software testing. Pexpect is in the spirit of Don Libes' Expect, but
  Pexpect is pure Python. Unlike other Expect-like modules for Python, Pexpect
  does not require TCL or Expect nor does it require C extensions to be
  compiled.  It should work on any platform that supports the standard Python
  pty module.


pkgId: b6ee6296eebae4968ef60ca82f05e51a63d0298b915d74ec5f28b6d6ca06f146
name: python3-pip-wheel
arch: noarch
version: 23.3.2
epoch: 0
release: 3.el10
summary: The pip wheel
description: A Python wheel of pip to use with venv.
url: https://pip.pypa.io/
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: python-pip-23.3.2-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-pip-wheel-23.3.2-3.el10.noarch.rpm
checksum_type: sha256
rpm_license:
  MIT AND Python-2.0.1 AND Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND ISC AND LGPL-2.1-only AND MPL-2.0 AND (Apache-2.0 OR BSD-2-Clause)


pkgId: cfc42e6ad571a2c73aa2456f93a1e24e5c5c6eda4065803e0e0c7b5993053709
name: python3-ply
arch: noarch
version: 3.11
epoch: 0
release: 24.el10
summary: Python Lex-Yacc
url: http://www.dabeaz.com/ply/
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-03.stream.rdu2.redhat.com
rpm_sourcerpm: python-ply-3.11-24.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-ply-3.11-24.el10.noarch.rpm
checksum_type: sha256
description:
  PLY is a straightforward lex/yacc implementation. Here is a list of its
  essential features:
  * It is implemented entirely in Python.
  * It uses LR-parsing which is reasonably efficient and well suited for larger
    grammars.
  * PLY provides most of the standard lex/yacc features including support
    for empty productions, precedence rules, error recovery, and support
    for ambiguous grammars.
  * PLY is straightforward to use and provides very extensive error checking.
  * PLY doesn't try to do anything more or less than provide the basic lex/yacc
    functionality. In other words, it's not a large parsing framework or a
    component of some larger system.

  Python 3 version.


pkgId: 1d383caf8a0b024e28bb22e8c8f70dd584593901a47cfda9c29fdec8c7dccf3a
name: python3-policycoreutils
arch: noarch
version: 3.10
epoch: 0
release: 2.el10
summary: SELinux policy core python3 interfaces
url: https://github.com/SELinuxProject/selinux
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: policycoreutils-3.10-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-policycoreutils-3.10-2.el10.noarch.rpm
checksum_type: sha256
description:
  The python3-policycoreutils package contains the interfaces that can be used
  by python 3 in an SELinux environment.


pkgId: 6dc7f6f09f4db2f47689df039ec10abfd6099626c9c6bbf204c7f9929bd126fd
name: python3-pycparser
arch: noarch
version: 2.20
epoch: 0
release: 15.el10
summary: C parser and AST generator written in Python
url: http://github.com/eliben/pycparser
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: python-pycparser-2.20-15.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-pycparser-2.20-15.el10.noarch.rpm
checksum_type: sha256
description:
  pycparser is a complete parser for the C language, written in pure Python.
  It is a module designed to be easily integrated into applications that
  need to parse C source code.


pkgId: 23f54fa0de33f11024543788dcf5d0229902d3ab82c7e252a581a9da8878102a
name: python3-pyparsing
arch: noarch
version: 3.1.1
epoch: 0
release: 5.el10
summary: Python package with an object-oriented approach to text processing
url: https://github.com/pyparsing/pyparsing
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-07.stream.rdu2.redhat.com
rpm_sourcerpm: pyparsing-3.1.1-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-pyparsing-3.1.1-5.el10.noarch.rpm
checksum_type: sha256
description:
  pyparsing is a module that can be used to easily and directly configure syntax
  definitions for any number of text parsing applications.


pkgId: 69e5069331c66c49738f7c558b3b78ec5aab81741af1d810629fb3a878a3f540
name: python3-pyudev
arch: noarch
version: 0.24.1
epoch: 0
release: 10.el10
summary: A libudev binding
url: http://pypi.python.org/pypi/pyudev
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-05.stream.rdu2.redhat.com
rpm_sourcerpm: python-pyudev-0.24.1-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-pyudev-0.24.1-10.el10.noarch.rpm
checksum_type: sha256
description:
  pyudev is a LGPL licensed, pure Python binding for libudev, the device
  and hardware management and information library for Linux.  It supports
  almost all libudev functionality, you can enumerate devices, query device
  properties and attributes or monitor devices, including asynchronous
  monitoring with threads, or within the event loops of Qt, Glib or wxPython.
  The binding supports CPython 3 and PyPy.


pkgId: c663ab34210821d35e5aa41489e1310efcb2b5424a404794da592568dc9356f2
name: python3-pyyaml
arch: s390x
version: 6.0.1
epoch: 0
release: 18.el10
summary: YAML parser and emitter for Python
url: https://github.com/yaml/pyyaml
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: PyYAML-6.0.1-18.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-pyyaml-6.0.1-18.el10.s390x.rpm
checksum_type: sha256
description:
  YAML is a data serialization format designed for human readability and
  interaction with scripting languages.  PyYAML is a YAML parser and
  emitter for Python.

  PyYAML features a complete YAML 1.1 parser, Unicode support, pickle
  support, capable extension API, and sensible error messages.  PyYAML
  supports standard YAML tags and provides Python-specific tags that
  allow to represent an arbitrary Python object.

  PyYAML is applicable for a broad range of tasks from complex
  configuration files to object serialization and persistence.


pkgId: 63579275b40e3ecbc75f3180105067d2ef8d3f89252c1533c39c4db83022923b
name: python3-referencing
arch: noarch
version: 0.31.1
epoch: 0
release: 6.el10
summary: An implementation-agnostic implementation of JSON reference resolution
url: https://pypi.python.org/pypi/referencing
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-07.stream.rdu2.redhat.com
rpm_sourcerpm: python-referencing-0.31.1-6.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-referencing-0.31.1-6.el10.noarch.rpm
checksum_type: sha256
description:
  An implementation-agnostic implementation of JSON reference resolution.
  In other words, a way for e.g. JSON Schema tooling to resolve the $ref
  keyword across all drafts without needing to implement support themselves.


pkgId: 4f854ef46031343ee1f5de29a13856122793ccf6f59f14b8e2a102f8378753f7
name: python3-requests
arch: noarch
version: 2.32.3
epoch: 0
release: 1.el10
summary: HTTP library, written in Python, for human beings
url: https://pypi.io/project/requests
rpm_license: Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.stream.rdu2.redhat.com
rpm_sourcerpm: python-requests-2.32.3-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-requests-2.32.3-1.el10.noarch.rpm
checksum_type: sha256
description:
  Most existing Python modules for sending HTTP requests are extremely verbose and
  cumbersome. Python’s built-in urllib2 module provides most of the HTTP
  capabilities you should need, but the API is thoroughly broken. This library is
  designed to make HTTP requests easy for developers.


pkgId: 899c9d2f5c07d14a8aa5ba608ec3a34adaf6a783c2d4a2783009b97daa394354
name: python3-rpm
arch: s390x
version: 4.19.1.1
epoch: 0
release: 17.el10
summary: Python 3 bindings for apps which will manipulate RPM packages
url: http://www.rpm.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: rpm-4.19.1.1-17.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-rpm-4.19.1.1-17.el10.s390x.rpm
checksum_type: sha256
description:
  The python3-rpm package contains a module that permits applications
  written in the Python programming language to use the interface
  supplied by RPM Package Manager libraries.

  This package should be installed if you want to develop Python 3
  programs that will manipulate RPM packages and databases.


pkgId: 28a0f932b4ac50dff7567d30903ef2f393ca51342ff664b4737ae1838b364559
name: python3-samba
arch: s390x
version: 4.23.4
epoch: 0
release: 101.el10
summary: Samba Python3 libraries
url: https://www.samba.org
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: samba-4.23.4-101.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-samba-4.23.4-101.el10.s390x.rpm
checksum_type: sha256
description:
  The python3-samba package contains the Python 3 libraries needed by programs
  that use SMB, RPC and other Samba provided protocols in Python 3 programs.


pkgId: 5782bc6aaec041fc5c91c86cd4a7c80bdc863fa9ab8019468ddc9ff38b422bf3
name: python3-setools
arch: s390x
version: 4.5.1
epoch: 0
release: 4.el10
summary: Policy analysis tools for SELinux
url: https://github.com/SELinuxProject/setools/wiki
rpm_license: LGPL-2.1-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: setools-4.5.1-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-setools-4.5.1-4.el10.s390x.rpm
checksum_type: sha256
description:
  SETools is a collection of graphical tools, command-line tools, and
  Python 3 modules designed to facilitate SELinux policy analysis.


pkgId: a89d8c55cbd8f833599ca853341b7bd698f70b966590c5dc2b2d160fc3d98f67
name: python3-setuptools
arch: noarch
version: 69.0.3
epoch: 0
release: 12.el10
summary: Easily build and distribute Python 3 packages
url: https://pypi.python.org/pypi/setuptools
rpm_license: MIT AND Apache-2.0 AND (BSD-2-Clause OR Apache-2.0) AND Python-2.0.1
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-01.stream.rdu2.redhat.com
rpm_sourcerpm: python-setuptools-69.0.3-12.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-setuptools-69.0.3-12.el10.noarch.rpm
checksum_type: sha256
description:
  Setuptools is a collection of enhancements to the Python 3 distutils that allow
  you to more easily build and distribute Python 3 packages, especially ones that
  have dependencies on other packages.

  This package also contains the runtime components of setuptools, necessary to
  execute the software that requires pkg_resources.


pkgId: 4f7d2522b81646fb2e16cec14dc0639978e9b1d31b9da7df1fb7416bf3380910
name: python3-six
arch: noarch
version: 1.16.0
epoch: 0
release: 15.el10
summary: Python 2 and 3 compatibility utilities
url: https://github.com/benjaminp/six
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: python-six-1.16.0-15.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-six-1.16.0-15.el10.noarch.rpm
checksum_type: sha256
description:
  Six is a Python 2 and 3 compatibility library. It provides utility functions
  for smoothing over the differences between the Python versions with the goal
  of writing Python code that is compatible on both Python versions.


pkgId: 12779b9db888aee50ce45da435bc8d1faadb4c883616e348aa578f889905edb0
name: python3-sss
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: Python3 bindings for sssd
url: https://github.com/SSSD/sssd/
rpm_license: LGPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-sss-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides python3 bindings:
      * function for retrieving list of groups user belongs to
      * class for obfuscation of passwords


pkgId: 31ef3131dea2554a0040c8505ebe967b752337b43d2154b8972d9f327b20a6c2
name: python3-subscription-manager-rhsm
arch: s390x
version: 1.30.10
epoch: 0
release: 1.el10
summary: A Python library to communicate with a Red Hat Unified Entitlement Platform
url: http://www.candlepinproject.org/
rpm_license: GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: subscription-manager-1.30.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-subscription-manager-rhsm-1.30.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  A small library for communicating with the REST interface of a Red Hat Unified
  Entitlement Platform. This interface is used for the management of system
  entitlements, certificates, and access to content.


pkgId: 9b7475e300509b25d1835c7872fa44eabd39fafbcc86fa2b8f229ea9d6d054a7
name: python3-systemd
arch: s390x
version: 235
epoch: 0
release: 10.el10
summary: Python module wrapping libsystemd functionality
url: https://github.com/systemd/python-systemd
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: python-systemd-235-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-systemd-235-10.el10.s390x.rpm
checksum_type: sha256
description:
  Python module for native access to the libsystemd facilities. Functionality
  includes sending of structured messages to the journal and reading journal
  files, querying machine and boot identifiers and a lists of message identifiers
  provided by systemd. Other functionality provided the library is also wrapped.


pkgId: 9aa8045b0b900e34b65d6aefe42afd15f1a875f75dd30234c43fc9ac42dc0a48
name: python3-typing-extensions
arch: noarch
version: 4.9.0
epoch: 0
release: 5.el10
summary: Python Typing Extensions
url: https://pypi.org/project/typing-extensions/
rpm_license: PSF-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-04.stream.rdu2.redhat.com
rpm_sourcerpm: python-typing-extensions-4.9.0-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-typing-extensions-4.9.0-5.el10.noarch.rpm
checksum_type: sha256
description:
  The typing_extensions module serves two related purposes:

    Enable use of new type system features on older Python versions.
    For example, typing.TypeGuard is new in Python 3.10, but typing_extensions
    allows users on previous Python versions to use it too.

    Enable experimentation with new type system PEPs before they are accepted and
    added to the typing module.

  typing_extensions is treated specially by static type checkers such as mypy and
  pyright. Objects defined in typing_extensions are treated the same way as
  equivalent forms in typing.

  typing_extensions uses Semantic Versioning. The major version will be
  incremented only for backwards-incompatible changes. Therefore, it's safe to
  depend on typing_extensions like this: typing_extensions >=x.y, <(x+1),
  where x.y is the first version that includes all features you need.


pkgId: a8be97901efcfb034300672e8b813faf1eac8f084544c22a7dc32900cf6a7371
name: python3-urllib3
arch: noarch
version: 1.26.19
epoch: 0
release: 1.el10
summary: HTTP library with thread-safe connection pooling, file post, and more
url: https://github.com/urllib3/urllib3
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-04.stream.rdu2.redhat.com
rpm_sourcerpm: python-urllib3-1.26.19-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-urllib3-1.26.19-1.el10.noarch.rpm
checksum_type: sha256
description:
  urllib3 is a powerful, user-friendly HTTP client for Python. urllib3 brings
  many critical features that are missing from the Python standard libraries:

    • Thread safety.
    • Connection pooling.
    • Client-side SSL/TLS verification.
    • File uploads with multipart encoding.
    • Helpers for retrying requests and dealing with HTTP redirects.
    • Support for gzip, deflate, brotli, and zstd encoding.
    • Proxy support for HTTP and SOCKS.
    • 100% test coverage.


pkgId: 6c6386ed13c2dbe007f15998dae8999a22f48e6528eeb7ddf565a96642858bae
name: python3-urwid
arch: s390x
version: 2.5.3
epoch: 0
release: 3.el10
summary: Console user interface library
url: http://excess.org/urwid/
rpm_license: LGPL-2.1-or-later AND MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: python-urwid-2.5.3-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-urwid-2.5.3-3.el10.s390x.rpm
checksum_type: sha256
description:
  Urwid is a Python library for making text console applications.  It has
  many features including fluid interface resizing, support for UTF-8 and
  CJK encodings, standard and custom text layout modes, simple markup for
  setting text attributes, and a powerful, dynamic list box that handles a
  mix of widget types.  It is flexible, modular, and leaves the developer in
  control.


pkgId: 1e954201d37678949f6e42eb005b7ddb22ad4071270cf3b57458a90023bee148
name: python3-wcwidth
arch: noarch
version: 0.2.6
epoch: 0
release: 4.el10
summary: Measures number of Terminal column cells of wide-character codes
url: https://github.com/jquast/wcwidth
rpm_license: MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: python-wcwidth-0.2.6-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/python3-wcwidth-0.2.6-4.el10.noarch.rpm
checksum_type: sha256
description:
  This API is mainly for Terminal Emulator implementors, or those writing programs
  that expect to interpreted by a terminal emulator and wish to determine the
  printable width of a string on a Terminal.


pkgId: ac7d3d1b2e36c684df3d78eea24b9996d2e53b84fdb3c0e4ee81794eedf3fbe4
name: qcom-firmware
arch: noarch
version: 20250708
epoch: 0
release: 18.el10
summary: Firmware for Qualcomm SoCs
url: http://www.kernel.org/
rpm_license: Redistributable, no modification permitted
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: linux-firmware-20250708-18.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/qcom-firmware-20250708-18.el10.noarch.rpm
checksum_type: sha256
description:
  Firmware for various compoents in Qualcomm SoCs including Adreno
  GPUs, Venus video encode/decode, Audio DSP, Compute DSP, WWAN
  modem, Sensor DSPs.


pkgId: 7227f9a9e43ae7f029e79f43f7c43a9621d591085bc65182d9cde7b445b8fe0c
name: quota
arch: s390x
version: 4.09
epoch: 1
release: 10.el10
summary: System administration tools for monitoring users' disk usage
url: http://sourceforge.net/projects/linuxquota/
rpm_license: GPL-2.0-only AND GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: quota-4.09-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/quota-4.09-10.el10.s390x.rpm
checksum_type: sha256
description:
  The quota package contains system administration tools for monitoring
  and limiting user and or group disk usage per file system.


pkgId: 853d9bc71e42b7e79e7cb59665eff6569797c02999b4a90e87d801c897a85216
name: rdma-core
arch: s390x
version: 51.0
epoch: 0
release: 3.el10
summary: RDMA core userspace libraries and daemons
url: https://github.com/linux-rdma/rdma-core
rpm_license: GPLv2 or BSD
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: rdma-core-51.0-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/rdma-core-51.0-3.el10.s390x.rpm
checksum_type: sha256
description:
  RDMA core userspace infrastructure and documentation, including initialization
  scripts, kernel driver-specific modprobe override configs, IPoIB network
  scripts, dracut rules, and the rdma-ndd utility.


pkgId: fd8cc3c7dd19bf773afb0488b2521d1710dfc1d8337fbff55c9f8d84572a4f9f
name: readline
arch: s390x
version: 8.2
epoch: 0
release: 11.el10
summary: A library for editing typed command lines
url: https://tiswww.case.edu/php/chet/readline/rltop.html
rpm_license: GPL-3.0-or-later AND GPL-2.0-or-later AND GFDL-1.3-no-invariants-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: readline-8.2-11.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/readline-8.2-11.el10.s390x.rpm
checksum_type: sha256
description:
  The Readline library provides a set of functions that allow users to
  edit command lines. Both Emacs and vi editing modes are available. The
  Readline library includes additional functions for maintaining a list
  of previously-entered command lines for recalling or editing those
  lines, and for performing csh-like history expansion on previous
  commands.


pkgId: bc5f537ff6848b48dbe8fff61578aea7701ad1511d06f225017a226fa93ffcab
name: readonly-root
arch: noarch
version: 10.25
epoch: 0
release: 1.el10
summary: Service for configuring read-only root support
url: https://github.com/fedora-sysv/initscripts
rpm_license: GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: initscripts-10.25-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/readonly-root-10.25-1.el10.noarch.rpm
checksum_type: sha256
description:
  This package provides script & configuration file for setting up read-only root
  support. Additional configuration is required after installation.

  Please note that readonly-root package is considered deprecated with limited support.
  Please use systemd-volatile-root functionality instead, if possible.


pkgId: 8aa3b0db6d66d0273432c47a000c67e24c07d211a81b5e8ba3c9ee588b64f153
name: realmd
arch: s390x
version: 0.17.1
epoch: 0
release: 10.el10
summary: Kerberos realm enrollment service
url: https://gitlab.freedesktop.org/realmd/realmd
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: realmd-0.17.1-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/realmd-0.17.1-10.el10.s390x.rpm
checksum_type: sha256
description:
  realmd is a DBus system service which manages discovery and enrollment in realms
  and domains like Active Directory or IPA. The control center uses realmd as the
  back end to 'join' a domain simply and automatically configure things correctly.


pkgId: bcce43c09696cb4086efee4cd43cf98ca57e7bef23895e2db31eeec35b6d0bce
name: redhat-mono-vf-fonts
arch: noarch
version: 4.0.3
epoch: 0
release: 12.el10
summary: The Variable font of Red Hat Mono fonts
url: https://github.com/RedHatOfficial/RedHatFont
rpm_license: OFL-1.1-RFN AND CC-BY-SA-4.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-04.stream.rdu2.redhat.com
rpm_sourcerpm: redhat-fonts-4.0.3-12.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/redhat-mono-vf-fonts-4.0.3-12.el10.noarch.rpm
checksum_type: sha256
description:
  Red Hat Typeface is a fresh take on the geometric sans genre,
  taking inspiration from a range of American sans serifs
  including Tempo and Highway Gothic.

  The Display styles, made for headlines and big statements,
  are low contrast and spaced tightly, with a large x-height and open counters.

  The Text styles have a slightly smaller x-height and narrower width
  for better legibility, are spaced more generously, and have thinned joins
  for better performance at small sizes.

  The Mono styles are similar to the Text styles, but are adapted
  for better performance to render code and similar text.

  The three families can be used together seamlessly at a range of sizes.

  The fonts were originally commissioned by Paula Scher / Pentagram
  and designed by Jeremy Mickel / MCKL for the new Red Hat identity.

  This package provides the variable font version of the Monospace fonts variant.


pkgId: aadbba720a6d96923f4692884d6a229652aae16706201397c3c2650fa3fc637b
name: redhat-text-vf-fonts
arch: noarch
version: 4.0.3
epoch: 0
release: 12.el10
summary: The variable font of Red Hat Text fonts
url: https://github.com/RedHatOfficial/RedHatFont
rpm_license: OFL-1.1-RFN AND CC-BY-SA-4.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-04.stream.rdu2.redhat.com
rpm_sourcerpm: redhat-fonts-4.0.3-12.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/redhat-text-vf-fonts-4.0.3-12.el10.noarch.rpm
checksum_type: sha256
description:
  Red Hat Typeface is a fresh take on the geometric sans genre,
  taking inspiration from a range of American sans serifs
  including Tempo and Highway Gothic.

  The Display styles, made for headlines and big statements,
  are low contrast and spaced tightly, with a large x-height and open counters.

  The Text styles have a slightly smaller x-height and narrower width
  for better legibility, are spaced more generously, and have thinned joins
  for better performance at small sizes.

  The Mono styles are similar to the Text styles, but are adapted
  for better performance to render code and similar text.

  The three families can be used together seamlessly at a range of sizes.

  The fonts were originally commissioned by Paula Scher / Pentagram
  and designed by Jeremy Mickel / MCKL for the new Red Hat identity.

  This package provides the variable font version of the Text fonts variant.


pkgId: a1b7b9ed9d56c69ba5e2fdd24a8a5b603dd6e865a0c5e4389c47c282135ad78f
name: restore
arch: s390x
version: 0.4
epoch: 1
release: 0.58.b47.el10
summary: Program for restoring ext2/ext3 filesystems
url: https://sourceforge.net/projects/dump/
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: restore-0.4-0.58.b47.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/restore-0.4-0.58.b47.el10.s390x.rpm
checksum_type: sha256
description:
  The restore command performs the inverse function of dump; it can
  restore a full backup of a filesystem. Subsequent incremental backups
  can then be layered on top of the full backup. Single files and
  directory subtrees may also be restored from full or partial backups.

  Install restore if you need restoring filesystems after backups
  made by dump.


pkgId: 741afaa709e37ca41535b42584493a057530b61613dbff8ea7d1d4d3e3030cd1
name: rhsm-icons
arch: noarch
version: 11.1
epoch: 0
release: 1.el10
summary: Icons for Red Hat Subscription Management client tools
url: https://www.candlepinproject.org/
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-05.stream.rdu2.redhat.com
rpm_sourcerpm: subscription-manager-cockpit-11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/rhsm-icons-11.1-1.el10.noarch.rpm
checksum_type: sha256
description:
  This package contains the desktop icons for the graphical interfaces provided for management
  of Red Hat subscriptions: subscription-manager-gui, subscription-manager-cockpit-plugin.


pkgId: c9c54b3acbe1fd7df2b7d24c1fc02d91d05f2e49b9f8c8f20b618f7bc15ea9fd
name: rmt
arch: s390x
version: 1.6
epoch: 2
release: 14.el10
summary: Provides certain programs with access to remote tape devices
url: http://freecode.com/projects/star
rpm_license: CDDL-1.0 AND GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: star-1.6-14.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/rmt-1.6-14.el10.s390x.rpm
checksum_type: sha256
description:
  The rmt utility provides remote access to tape devices for programs
  like dump (a filesystem backup program), restore (a program for
  restoring files from a backup), and tar (an archiving program).


pkgId: 88ee7aeca94e4118bc1ca98198c38a73fb8e2f7b8c14f9907824f086e041f4ed
name: rng-tools
arch: s390x
version: 6.17
epoch: 0
release: 3.el10
summary: Random number generator related utilities
url: https://github.com/nhorman/rng-tools
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: rng-tools-6.17-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/rng-tools-6.17-3.el10.s390x.rpm
checksum_type: sha256
description:
  This is a random number generator daemon and its tools. It monitors
  a set of entropy sources present on a system (like /dev/hwrng, RDRAND,
  TPM, jitter) and supplies entropy from them to a kernel entropy pool.


pkgId: 27ef543957565a1725af76bad41e7c2a1386ccb4643cc12b734c49dc508fae8b
name: rootfiles
arch: noarch
version: 8.1
epoch: 0
release: 37.el10
summary: The basic required files for the root user's directory
rpm_license: LicenseRef-Not-Copyrightable
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-04.stream.rdu2.redhat.com
rpm_sourcerpm: rootfiles-8.1-37.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/rootfiles-8.1-37.el10.noarch.rpm
checksum_type: sha256
description:
  The rootfiles package contains basic required files that are placed
  in the root user's account.  These files are basically the same
  as those in /etc/skel, which are placed in regular
  users' home directories.


pkgId: 4342ea6a98affa7dd322ade44892d7ce1ab04f39c2635a8684b3789bb6e48383
name: rpcbind
arch: s390x
version: 1.2.7
epoch: 0
release: 2.el10
summary: Universal Addresses to RPC Program Number Mapper
url: http://nfsv4.bullopensource.org
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: rpcbind-1.2.7-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/rpcbind-1.2.7-2.el10.s390x.rpm
checksum_type: sha256
description:
  The rpcbind utility is a server that converts RPC program numbers into
  universal addresses.  It must be running on the host to be able to make
  RPC calls on a server on that machine.


pkgId: a76716cc95cdd809823b5dfd99a4e6b2279dee8b2553d14f1121b9ca9d9f39da
name: rpm
arch: s390x
version: 4.19.1.1
epoch: 0
release: 17.el10
summary: The RPM package management system
url: http://www.rpm.org/
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: rpm-4.19.1.1-17.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/rpm-4.19.1.1-17.el10.s390x.rpm
checksum_type: sha256
description:
  The RPM Package Manager (RPM) is a powerful command line driven
  package management system capable of installing, uninstalling,
  verifying, querying, and updating software packages. Each software
  package consists of an archive of files along with information about
  the package like its version, a description, etc.


pkgId: d8624494704a4811645266daa1adb72123408c668cae2f10ca2f8855010bbd89
name: rpm-sequoia
arch: s390x
version: 1.10.1.1
epoch: 0
release: 1.el10
summary: Implementation of the RPM PGP interface using Sequoia
description: An implementation of the RPM PGP interface using Sequoia.
url: https://crates.io/crates/rpm-sequoia
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: rust-rpm-sequoia-1.10.1.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/rpm-sequoia-1.10.1.1-1.el10.s390x.rpm
checksum_type: sha256
rpm_license:
  LGPL-2.0-or-later AND Apache-2.0 AND BSL-1.0 AND MIT AND Unicode-DFS-2016 AND (Apache-2.0 OR MIT) AND (MIT OR Apache-2.0 OR Zlib) AND (Unlicense OR MIT)


pkgId: 7f015897248eddb727089d37ffdae8bf4b43c93c29e7934dd0694366bf733691
name: rsync
arch: s390x
version: 3.3.0
epoch: 0
release: 5.el10
summary: A program for synchronizing files over a network
url: https://rsync.samba.org/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: rsync-3.3.0-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/rsync-3.3.0-5.el10.s390x.rpm
checksum_type: sha256
description:
  Rsync uses a reliable algorithm to bring remote and host files into
  sync very quickly. Rsync is fast because it just sends the differences
  in the files over the network instead of sending the complete
  files. Rsync is often used as a very powerful mirroring process or
  just as a more capable replacement for the rcp command. A technical
  report which describes the rsync algorithm is included in this
  package.


pkgId: 7cf4d973ba4ff64ef2260f47a67252394b51b9db46a555a861e8d7759a7c7ec0
name: samba-dc-libs
arch: s390x
version: 4.23.4
epoch: 0
release: 101.el10
summary: Samba AD Domain Controller Libraries
url: https://www.samba.org
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: samba-4.23.4-101.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/samba-dc-libs-4.23.4-101.el10.s390x.rpm
checksum_type: sha256
description:
  The samba-dc-libs package contains the libraries needed by the DC to
  link against the SMB, RPC and other protocols.


pkgId: 243593e0d8ee5df38f6b0df7b6185448c4e583930ebc7babf301fa00d88336dc
name: samba-libs
arch: s390x
version: 4.23.4
epoch: 0
release: 101.el10
summary: Samba libraries
url: https://www.samba.org
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: samba-4.23.4-101.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/samba-libs-4.23.4-101.el10.s390x.rpm
checksum_type: sha256
description:
  The samba-libs package contains the libraries needed by programs that link
  against the SMB, RPC and other protocols provided by the Samba suite.


pkgId: a308dea75193c20877006984bb7194cff6dbe6664e95cb96f28154a0a38fe3f9
name: samba-usershares
arch: noarch
version: 4.23.4
epoch: 0
release: 101.el10
summary: Provides support for non-root user shares
url: https://www.samba.org
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: samba-4.23.4-101.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/samba-usershares-4.23.4-101.el10.noarch.rpm
checksum_type: sha256
description:
  Installing this package will provide a configuration file, group and
  directories to support non-root user shares. You can configure them
  as a user using the `net usershare` command.


pkgId: 9cac613086b9524bd9a61dce6a40292ce256b7d8f603a2ecb9a3c03ad56e9fb6
name: samba-winbind
arch: s390x
version: 4.23.4
epoch: 0
release: 101.el10
summary: Samba winbind
url: https://www.samba.org
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: samba-4.23.4-101.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/samba-winbind-4.23.4-101.el10.s390x.rpm
checksum_type: sha256
description:
  The samba-winbind package provides the winbind NSS library, and some client
  tools.  Winbind enables Linux to be a full member in Windows domains and to use
  Windows user and group accounts on Linux.


pkgId: b8ebe8813aca67dfcfbcdedda8c9eb5cdadbd923c41e1d3919e8b912c337d287
name: samba-winbind-modules
arch: s390x
version: 4.23.4
epoch: 0
release: 101.el10
summary: Samba winbind modules
url: https://www.samba.org
rpm_license: GPL-3.0-or-later AND LGPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: samba-4.23.4-101.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/samba-winbind-modules-4.23.4-101.el10.s390x.rpm
checksum_type: sha256
description:
  The samba-winbind-modules package provides the NSS library and a PAM module
  necessary to communicate to the Winbind Daemon


pkgId: 893f012a09b0db7e1a9fe53b704ea67ac0b58c45294c3deceb58a888d5690e5d
name: sed
arch: s390x
version: 4.9
epoch: 0
release: 2.el10
summary: A GNU stream text editor
url: http://sed.sourceforge.net/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: sed-4.9-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sed-4.9-2.el10.s390x.rpm
checksum_type: sha256
description:
  The sed (Stream EDitor) editor is a stream or batch (non-interactive)
  editor.  Sed takes text as input, performs an operation or set of
  operations on the text and outputs the modified text.  The operations
  that sed performs (substitutions, deletions, insertions, etc.) can be
  specified in a script file or from the command line.


pkgId: 40f489ddac885bad99f1e9a19b29410940c461382ed58e93a55a49b8ca797c41
name: selinux-policy
arch: noarch
version: 42.1.17
epoch: 0
release: 1.el10
summary: SELinux policy configuration
url: https://github.com/fedora-selinux/selinux-policy
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-02.stream.rdu2.redhat.com
rpm_sourcerpm: selinux-policy-42.1.17-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/selinux-policy-42.1.17-1.el10.noarch.rpm
checksum_type: sha256
description:
  SELinux core policy package.
  Originally based off of reference policy,
  the policy has been adjusted to provide support for Fedora.


pkgId: 8e74ce3c5393dde52d8f0b1b19e2534b69b429ccdf920bea135f21c2234a1f8d
name: selinux-policy-doc
arch: noarch
version: 42.1.17
epoch: 0
release: 1.el10
summary: SELinux policy documentation
url: https://github.com/fedora-selinux/selinux-policy
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-02.stream.rdu2.redhat.com
rpm_sourcerpm: selinux-policy-42.1.17-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/selinux-policy-doc-42.1.17-1.el10.noarch.rpm
checksum_type: sha256
description:
  SELinux policy documentation package.
  This package contains manual pages and documentation of the policy modules.


pkgId: 6011651152f4688156bdaaae3ae3441552d19d146709507f6cce06827f9d956c
name: setools-console
arch: s390x
version: 4.5.1
epoch: 0
release: 4.el10
summary: Policy analysis command-line tools for SELinux
url: https://github.com/SELinuxProject/setools/wiki
rpm_license: GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: setools-4.5.1-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/setools-console-4.5.1-4.el10.s390x.rpm
checksum_type: sha256
description:
  SETools is a collection of graphical tools, command-line tools, and
  libraries designed to facilitate SELinux policy analysis.

  This package includes the following console tools:

    sediff       Compare two policies to find differences.
    seinfo       List policy components.
    sesearch     Search rules (allow, type_transition, etc.)


pkgId: 2c0ed523ae4256b04312207ac0a26ae29084aaa44d90c5fc39104cb17b9f941f
name: setup
arch: noarch
version: 2.14.5
epoch: 0
release: 3.el10
summary: A set of system configuration and setup files
url: https://pagure.io/setup/
rpm_license: LicenseRef-Fedora-Public-Domain
rpm_vendor: CentOS
rpm_group: System Environment/Base
rpm_buildhost: x86-04.stream.rdu2.redhat.com
rpm_sourcerpm: setup-2.14.5-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/setup-2.14.5-3.el10.noarch.rpm
checksum_type: sha256
description:
  The setup package contains a set of important system configuration and
  setup files, such as passwd, group, and profile.


pkgId: 2dfb571107f50291468c1faea0a207ff5df85f342ea1a36068c758b3e86c1bc3
name: sg3_utils
arch: s390x
version: 1.48
epoch: 0
release: 5.el10
summary: Utilities for devices that use SCSI command sets
url: https://sg.danny.cz/sg/sg3_utils.html
rpm_license: GPL-2.0-or-later AND BSD-2-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sg3_utils-1.48-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sg3_utils-1.48-5.el10.s390x.rpm
checksum_type: sha256
description:
  Collection of Linux utilities for devices that use the SCSI command set.
  Includes utilities to copy data based on "dd" syntax and semantics (called
  sg_dd, sgp_dd and sgm_dd); check INQUIRY data and VPD pages (sg_inq); check
  mode and log pages (sginfo, sg_modes and sg_logs); spin up and down
  disks (sg_start); do self tests (sg_senddiag); and various other functions.
  See the README, CHANGELOG and COVERAGE files. Requires the linux kernel 2.4
  series or later. In the 2.4 series SCSI generic device names (e.g. /dev/sg0)
  must be used. In the 2.6 series other device names may be used as
  well (e.g. /dev/sda).

  Warning: Some of these tools access the internals of your system
  and the incorrect usage of them may render your system inoperable.


pkgId: 25a8991e9008d4e4cd0a4e39771eb738d233d892cdefcc5229ba19d9d314fbe5
name: shadow-utils
arch: s390x
version: 4.15.0
epoch: 2
release: 11.el10
summary: Utilities for managing accounts and shadow password files
url: https://github.com/shadow-maint/shadow
rpm_license: BSD-3-Clause AND GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: shadow-utils-4.15.0-11.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/shadow-utils-4.15.0-11.el10.s390x.rpm
checksum_type: sha256
description:
  The shadow-utils package includes the necessary programs for
  converting UNIX password files to the shadow password format, plus
  programs for managing user and group accounts. The pwconv command
  converts passwords to the shadow password format. The pwunconv command
  unconverts shadow passwords and generates a passwd file (a standard
  UNIX password file). The pwck command checks the integrity of password
  and shadow files. The lastlog command prints out the last login times
  for all users. The useradd, userdel, and usermod commands are used for
  managing user accounts. The groupadd, groupdel, and groupmod commands
  are used for managing group accounts.


pkgId: 7ba6f49c0ae77b5cc534454a17e6bab6ed707492c972850d6629098dfd845ba2
name: shared-mime-info
arch: s390x
version: 2.3
epoch: 0
release: 7.el10
summary: Shared MIME information database
url: http://freedesktop.org/Software/shared-mime-info
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: shared-mime-info-2.3-7.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/shared-mime-info-2.3-7.el10.s390x.rpm
checksum_type: sha256
description:
  This is the freedesktop.org shared MIME info database.

  Many programs and desktops use the MIME system to represent the types of
  files. Frequently, it is necessary to work out the correct MIME type for
  a file. This is generally done by examining the file's name or contents,
  and looking up the correct MIME type in a database.


pkgId: fd3226c81c26dc9a38c4940e04a9f4df91841a60b3c8193795178bca945a4df6
name: slang
arch: s390x
version: 2.3.3
epoch: 0
release: 6.el10
summary: Shared library for the S-Lang extension language
url: https://www.jedsoft.org/slang/
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: slang-2.3.3-6.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/slang-2.3.3-6.el10.s390x.rpm
checksum_type: sha256
description:
  S-Lang is an interpreted language and a programming library.  The
  S-Lang language was designed so that it can be easily embedded into
  a program to provide the program with a powerful extension language.
  The S-Lang library, provided in this package, provides the S-Lang
  extension language.  S-Lang's syntax resembles C, which makes it easy
  to recode S-Lang procedures in C if you need to.


pkgId: 76d4fc1ec0f6cf4944ba7744dfdd1d0e5c2cb4356f18cf688f1e192777c8c811
name: smartmontools
arch: s390x
version: 7.4
epoch: 1
release: 5.el10
summary: Tools for monitoring SMART capable hard disks
url: http://smartmontools.sourceforge.net/
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: smartmontools-7.4-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/smartmontools-7.4-5.el10.s390x.rpm
checksum_type: sha256
description:
  The smartmontools package contains two utility programs (smartctl
  and smartd) to control and monitor storage systems using the Self-
  Monitoring, Analysis and Reporting Technology System (SMART) built
  into most modern ATA and SCSI hard disks. In many cases, these
  utilities will provide advanced warning of disk degradation and
  failure.


pkgId: ba7dc1a72eadee512f51075734c00b4510df62cf1293bdbfecee6b4b0e0885c9
name: snappy
arch: s390x
version: 1.1.10
epoch: 0
release: 5.el10
summary: Fast compression and decompression library
url: https://github.com/google/snappy
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: snappy-1.1.10-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/snappy-1.1.10-5.el10.s390x.rpm
checksum_type: sha256
description:
  Snappy is a compression/decompression library. It does not aim for maximum
  compression, or compatibility with any other compression library; instead, it
  aims for very high speeds and reasonable compression. For instance, compared to
  the fastest mode of zlib, Snappy is an order of magnitude faster for most
  inputs, but the resulting compressed files are anywhere from 20% to 100%
  bigger.


pkgId: 236a33d6556b05143d3838fe900d2724c52cf51be511fab1ab591a4e6ad02e11
name: sos
arch: noarch
version: 4.10.1
epoch: 0
release: 1.el10
summary: A set of tools to gather troubleshooting information from a system
url: https://github.com/sosreport/sos
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Applications/System
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: sos-4.10.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sos-4.10.1-1.el10.noarch.rpm
checksum_type: sha256
description:
  Sos is a set of tools that gathers information about system
  hardware and configuration. The information can then be used for
  diagnostic purposes and debugging. Sos is commonly used to help
  support technicians and developers.


pkgId: 16313c11cc910876c2be5d1827c14a8a1292d34651f6e0f36bf40060ac1888b2
name: squashfs-tools
arch: s390x
version: 4.6.1
epoch: 0
release: 5.el10
summary: Utility for the creation of squashfs filesystems
url: https://github.com/plougher/squashfs-tools
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: squashfs-tools-4.6.1-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/squashfs-tools-4.6.1-5.el10.s390x.rpm
checksum_type: sha256
description:
  Squashfs is a highly compressed read-only filesystem for Linux.  This package
  contains the utilities for manipulating squashfs filesystems.


pkgId: 99d98c67422bf63d16a34c7d53376f4a09e5911c87ddf8567b9b19a1757fcc55
name: sssd
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: System Security Services Daemon
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides a set of daemons to manage access to remote directories and
  authentication mechanisms. It provides an NSS and PAM interface toward
  the system and a pluggable back end system to connect to multiple different
  account sources. It is also the basis to provide client auditing and policy
  services for projects like FreeIPA.

  The sssd subpackage is a meta-package that contains the daemon as well as all
  the existing back ends.


pkgId: d1031ff6307a9d3ee28dea8723fbd6b4261d8955e100cf795e78ea66711022eb
name: sssd-ad
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: The AD back end of the SSSD
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-ad-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides the Active Directory back end that the SSSD can utilize to fetch
  identity data from and authenticate against an Active Directory server.


pkgId: 58621db5670e5af76ee9b385297c112a8d8045b3da5a4ba594b5aed8e1d1fd90
name: sssd-common
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: Common files for the SSSD
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-common-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Common files for the SSSD. The common package includes all the files needed
  to run a particular back end, however, the back ends are packaged in separate
  subpackages such as sssd-ldap.


pkgId: 0665ce45960ed2d459b821386d5fb34e09256102a8c8c151635201e547be5969
name: sssd-common-pac
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: Common files needed for supporting PAC processing
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-common-pac-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides common files needed by SSSD providers such as IPA and Active Directory
  for handling Kerberos PACs.


pkgId: 4db9d71cdf26bf8bbc6caad90c422e2c7f4fd8e47b9070424d8c7352c0f6386c
name: sssd-dbus
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: The D-Bus responder of the SSSD
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-dbus-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides the D-Bus responder of the SSSD, called the InfoPipe, that allows
  the information from the SSSD to be transmitted over the system bus.


pkgId: 21a5fe0e3da1ac278a04f6f94e43445d1c6abe3df4b0ae60894d14a72468efb4
name: sssd-ipa
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: The IPA back end of the SSSD
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-ipa-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides the IPA back end that the SSSD can utilize to fetch identity data
  from and authenticate against an IPA server.


pkgId: a9f567eb13dc4f3cf0ffc832730c4b37a087163d08d0e78964a768549184a7d1
name: sssd-kcm
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: An implementation of a Kerberos KCM server
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-kcm-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  An implementation of a Kerberos KCM server. Use this package if you want to
  use the KCM: Kerberos credentials cache.


pkgId: 3d90f0ed29748d49147e1d4ec641b43042aa392934c5de85acf5d1755fd945ea
name: sssd-krb5-common
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: SSSD helpers needed for Kerberos and GSSAPI authentication
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-krb5-common-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides helper processes that the LDAP and Kerberos back ends can use for
  Kerberos user or host authentication.


pkgId: 8b075f144b84cbe0781d75259452fde9ada4fe535a9bfe0131b8c7c7a7e99bf1
name: sssd-ldap
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: The LDAP back end of the SSSD
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-ldap-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides the LDAP back end that the SSSD can utilize to fetch identity data
  from and authenticate against an LDAP server.


pkgId: a1d94d9f841b8d573e5f6e314bb0f92bbf916d9985de00848918a845a867e7cd
name: sssd-nfs-idmap
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: SSSD plug-in for NFSv4 rpc.idmapd
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-nfs-idmap-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  The libnfsidmap sssd module provides a way for rpc.idmapd to call SSSD to map
  UIDs/GIDs to names and vice versa. It can be also used for mapping principal
  (user) name to IDs(UID or GID) or to obtain groups which user are member of.


pkgId: 8a3fc87f02891e43c412961c8bc1b3eaa251375987f4c3b611b708f7283b43e8
name: sssd-passkey
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: SSSD helpers and plugins needed for authentication with passkey token
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-passkey-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  This package provides helper processes and Kerberos plugins that are required to
  enable authentication with passkey token.


pkgId: b47d2fc051940212631a03112a7d2d5e04cff7109df2fe44c2c47f5bef4183cf
name: sssd-proxy
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: The proxy back end of the SSSD
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-proxy-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides the proxy back end which can be used to wrap an existing NSS and/or
  PAM modules to leverage SSSD caching.


pkgId: e69f281ab49278c81af35868638b527315e932fab471b81cf9afe237069b23b6
name: sssd-tools
arch: s390x
version: 2.11.1
epoch: 0
release: 1.el10
summary: Userspace tools for use with the SSSD
url: https://github.com/SSSD/sssd/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sssd-2.11.1-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sssd-tools-2.11.1-1.el10.s390x.rpm
checksum_type: sha256
description:
  Provides several administrative tools:
      * sss_debuglevel to change the debug level on the fly
      * sss_seed which pre-creates a user entry for use in kickstarts
      * sss_obfuscate for generating an obfuscated LDAP password
      * sssctl -- an sssd status and control utility


pkgId: d7ec82452a6f0bb3bf6c57da2320b6b3e08a227b5e8c5adce1ca879f9ab1fdba
name: strace
arch: s390x
version: 6.12
epoch: 0
release: 1.el10
summary: Tracks and displays system calls associated with a running process
url: https://strace.io
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: strace-6.12-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/strace-6.12-1.el10.s390x.rpm
checksum_type: sha256
description:
  The strace program intercepts and records the system calls called and
  received by a running process.  Strace can print a record of each
  system call, its arguments and its return value.  Strace is useful for
  diagnosing problems and debugging, as well as for instructional
  purposes.

  Install strace if you need a tool to track the system calls made and
  received by a process.

rpm_license:
  LGPL-2.1-or-later AND GPL-2.0-or-later AND GPL-3.0-or-later AND BSD-2-Clause AND BSD-3-Clause AND (GPL-1.0-or-later WITH Linux-syscall-note) AND (GPL-2.0-or-later WITH Linux-syscall-note) AND (GPL-2.0-only WITH Linux-syscall-note) AND (LGPL-2.0-or-later WITH Linux-syscall-note) AND (LGPL-2.1-or-later WITH Linux-syscall-note) AND ((GPL-2.0-only WITH Linux-syscall-note) OR Linux-OpenIB) AND ((GPL-2.0-only WITH Linux-syscall-note) OR MIT) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR BSD-3-Clause) AND ISC AND X11 AND FSFAP AND FSFUL AND FSFULLR AND FSFULLRWD


pkgId: 3ce28d607a03b06ee29d4a6864b40c807ad2e7343d934f2fce6dc563ebb9a04f
name: stunnel
arch: s390x
version: 5.72
epoch: 0
release: 5.el10
summary: A TLS-encrypting socket wrapper
url: https://www.stunnel.org/
rpm_license: GPL-2.0-or-later WITH stunnel-exception AND MIT
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: stunnel-5.72-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/stunnel-5.72-5.el10.s390x.rpm
checksum_type: sha256
description:
  Stunnel is a socket wrapper which can provide TLS/SSL
  (Transport Layer Security/Secure Sockets Layer) support
  to ordinary applications. For example, it can be used in
  conjunction with imapd to create a TLS secure IMAP server.


pkgId: 6e8a1f07dc1f9b6756b4bae29ff27131cad86ca3bc827bc736c25f716c87e27a
name: subscription-manager
arch: s390x
version: 1.30.10
epoch: 0
release: 1.el10
summary: Tools and libraries for subscription and repository management
url: http://www.candlepinproject.org/
rpm_license: GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: subscription-manager-1.30.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/subscription-manager-1.30.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  The Subscription Manager package provides programs and libraries to allow users
  to manage subscriptions and yum repositories from the Red Hat entitlement
  platform.


pkgId: d218ee3ca8f1541a61d9fcd376a3a9e03d8b48da3edbff2547fc841076172110
name: subscription-manager-plugin-ostree
arch: s390x
version: 1.30.10
epoch: 0
release: 1.el10
summary: A plugin for handling OSTree content.
url: http://www.candlepinproject.org/
rpm_license: GPL-2.0-only AND GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: subscription-manager-1.30.10-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/subscription-manager-plugin-ostree-1.30.10-1.el10.s390x.rpm
checksum_type: sha256
description:
  Enables handling of content of type 'ostree' in any certificates
  from the server. Populates /ostree/repo/config as well as updates
  the remote in the currently deployed .origin file.


pkgId: d883be0d5069734f618fb8b07ad81143565248916aca77d5742bd070c8ff8773
name: subscription-manager-rhsm-certificates
arch: noarch
version: 20220623
epoch: 0
release: 5.el10
summary: Certificates required to communicate with a Red Hat Unified Entitlement Platform
url: https://www.candlepinproject.org/
rpm_license: GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-02.stream.rdu2.redhat.com
rpm_sourcerpm: subscription-manager-rhsm-certificates-20220623-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/subscription-manager-rhsm-certificates-20220623-5.el10.noarch.rpm
checksum_type: sha256
description:
  This package contains certificates required for communicating with the REST interface
  of a Red Hat Unified Entitlement Platform, used for the management of system entitlements
  and to receive access to content.


pkgId: 1638e61d9279a2bb26e8873abee654148da565f0bcc9df135dc72b32f43ca315
name: sudo
arch: s390x
version: 1.9.15
epoch: 0
release: 8.p5.el10
summary: Allows restricted root access for specified users
url: https://www.sudo.ws
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: sudo-1.9.15-8.p5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/sudo-1.9.15-8.p5.el10.s390x.rpm
checksum_type: sha256
description:
  Sudo (superuser do) allows a system administrator to give certain
  users (or groups of users) the ability to run some (or all) commands
  as root while logging all commands and arguments. Sudo operates on a
  per-command basis.  It is not a replacement for the shell.  Features
  include: the ability to restrict what commands a user may run on a
  per-host basis, copious logging of each command (providing a clear
  audit trail of who did what), a configurable timeout of the sudo
  command, and the ability to use the same configuration file (sudoers)
  on many different machines.


pkgId: 3aceb658b3e8aa8bafce13edbec2b6765e6a54d8be57bb3de74b0e787a71834a
name: symlinks
arch: s390x
version: 1.7
epoch: 0
release: 12.el10
summary: A utility which maintains a system's symbolic links
url: http://ibiblio.org/pub/Linux/utils/file/
rpm_license: Symlinks
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: symlinks-1.7-12.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/symlinks-1.7-12.el10.s390x.rpm
checksum_type: sha256
description:
  The symlinks utility performs maintenance on symbolic links.  Symlinks
  checks for symlink problems, including dangling symlinks which point
  to nonexistent files.  Symlinks can also automatically convert
  absolute symlinks to relative symlinks.

  Install the symlinks package if you need a program for maintaining
  symlinks on your system.


pkgId: bfa552b4d085443cd4a51cd83926f5bf5a8c0e063ec4728f1079b7f38b48ed4d
name: systemd
arch: s390x
version: 257
epoch: 0
release: 16.el10
summary: System and Service Manager
url: https://systemd.io
rpm_license: LGPL-2.1-or-later AND MIT AND GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: systemd-257-16.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/systemd-257-16.el10.s390x.rpm
checksum_type: sha256
description:
  systemd is a system and service manager that runs as PID 1 and starts the rest
  of the system. It provides aggressive parallelization capabilities, uses socket
  and D-Bus activation for starting services, offers on-demand starting of
  daemons, keeps track of processes using Linux control groups, maintains mount
  and automount points, and implements an elaborate transactional dependency-based
  service control logic. systemd supports SysV and LSB init scripts and works as a
  replacement for sysvinit. Other parts of this package are a logging daemon,
  utilities to control basic system configuration like the hostname, date, locale,
  maintain a list of logged-in users, system accounts, runtime directories and
  settings, and a logging daemons.


pkgId: 7bf68aec4388d3c5219c01427c7ed9e7310b32b4c7cf42984d21d929fe37052f
name: systemd-container
arch: s390x
version: 257
epoch: 0
release: 16.el10
summary: Tools for containers and VMs
url: https://systemd.io
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: systemd-257-16.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/systemd-container-257-16.el10.s390x.rpm
checksum_type: sha256
description:
  Systemd tools to spawn and manage containers and virtual machines.

  This package contains systemd-nspawn, machinectl, systemd-machined,
  and systemd-importd.


pkgId: 7bb8b63756c37c6082edee70e3da8a852d2007028b61c98de839a262a35371d7
name: systemd-oomd
arch: s390x
version: 257
epoch: 0
release: 16.el10
summary: A userspace out-of-memory (OOM) killer
url: https://systemd.io
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: systemd-257-16.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/systemd-oomd-257-16.el10.s390x.rpm
checksum_type: sha256
description:
  systemd-oomd is a system service that uses cgroups-v2 and pressure stall
  information (PSI) to monitor and take action on processes before an OOM
  occurs in kernel space.


pkgId: 57966d9d965b655abc8cbde0d4533eb970249d30d0f8b2fe24a516bb5aca153b
name: systemd-resolved
arch: s390x
version: 257
epoch: 0
release: 16.el10
summary: Network Name Resolution manager
url: https://systemd.io
rpm_license: LGPL-2.1-or-later AND MIT AND GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: systemd-257-16.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/systemd-resolved-257-16.el10.s390x.rpm
checksum_type: sha256
description:
  systemd-resolved is a system service that provides network name resolution to
  local applications. It implements a caching and validating DNS/DNSSEC stub
  resolver, as well as an LLMNR and MulticastDNS resolver and responder.


pkgId: b6fc3fd2778d0cd9bc7add21fefd6977554c9a901526722cf6cb7ed57e93bf1e
name: systemd-rpm-macros
arch: noarch
version: 257
epoch: 0
release: 16.el10
summary: Macros that define paths and scriptlets related to systemd
url: https://systemd.io
rpm_license: LGPL-2.1-or-later AND MIT AND GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: systemd-257-16.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/systemd-rpm-macros-257-16.el10.noarch.rpm
checksum_type: sha256
description:
  Just the definitions of rpm macros.

  See
  https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/#_systemd
  for information how to use those macros.


pkgId: bb1eaeba0b91a875d15d834eb9e2452c6008a6b12aba42c2ca13a29df66d2b92
name: systemd-udev
arch: s390x
version: 257
epoch: 0
release: 16.el10
summary: Rule-based device node and kernel event manager
url: https://systemd.io
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: systemd-257-16.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/systemd-udev-257-16.el10.s390x.rpm
checksum_type: sha256
description:
  This package contains systemd-udev and the rules and hardware database needed to
  manage device nodes. This package is necessary on physical machines and in
  virtual machines, but not in containers.

  This package also provides systemd-timesyncd, a network time protocol daemon.

  It also contains tools to manage encrypted home areas and secrets bound to the
  machine, and to create or grow partitions and make file systems automatically.


pkgId: efb27d3706cbc79b151a5337af23ba2184e5b58f14a2ef0c059b369e4a62d12f
name: tar
arch: s390x
version: 1.35
epoch: 2
release: 10.el10
summary: GNU file archiving program
url: https://www.gnu.org/software/tar/
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: tar-1.35-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/tar-1.35-10.el10.s390x.rpm
checksum_type: sha256
description:
  The GNU tar program saves many files together in one archive and can
  restore individual files (or all of the files) from that archive. Tar
  can also be used to add supplemental files to an archive and to update
  or list files in the archive. Tar includes multivolume support,
  automatic archive compression/decompression, the ability to perform
  remote archives, and the ability to perform incremental and full
  backups.

  If you want to use tar for remote backups, you also need to install
  the rmt package on the remote box.


pkgId: a9f675e7936dda3e60c976b5b3c19a0c7d76d392ff134dde65390ada75554853
name: tcl
arch: s390x
version: 8.6.13
epoch: 1
release: 3.el10
summary: Tool Command Language, pronounced tickle
url: http://tcl.sourceforge.net/
rpm_license: TCL AND GPL-3.0-or-later WITH bison-exception-2.2 AND BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: tcl-8.6.13-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/tcl-8.6.13-3.el10.s390x.rpm
checksum_type: sha256
description:
  The Tcl (Tool Command Language) provides a powerful platform for
  creating integration applications that tie together diverse
  applications, protocols, devices, and frameworks. When paired with the
  Tk toolkit, Tcl provides a fastest and powerful way to create
  cross-platform GUI applications.  Tcl can also be used for a variety
  of web-related tasks and for creating powerful command languages for
  applications.


pkgId: 16bae885532d88e6c31604eca2809048b54f87a8ce2706919bedecf930d4be1f
name: time
arch: s390x
version: 1.9
epoch: 0
release: 24.el10
summary: A GNU utility for monitoring a program's use of system resources
url: https://www.gnu.org/software/time/
rpm_license: GPL-3.0-or-later AND GFDL-1.3-no-invariants-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: time-1.9-24.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/time-1.9-24.el10.s390x.rpm
checksum_type: sha256
description:
  The GNU time utility runs another program, collects information about
  the resources used by that program while it is running, and displays
  the results.


pkgId: 305a39ae5e177d657fc8565162720fb3d42382aa6db4c74321decd6e6930f7d8
name: tmux
arch: s390x
version: 3.3a
epoch: 0
release: 10.20230918gitb202a2f.el10
summary: A terminal multiplexer
url: https://tmux.github.io/
rpm_license: ISC AND BSD-2-Clause AND BSD-3-Clause AND SSH-short AND LicenseRef-Fedora-Public-Domain
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: tmux-3.3a-10.20230918gitb202a2f.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/tmux-3.3a-10.20230918gitb202a2f.el10.s390x.rpm
checksum_type: sha256
description:
  tmux is a "terminal multiplexer."  It enables a number of terminals (or
  windows) to be accessed and controlled from a single terminal.  tmux is
  intended to be a simple, modern, BSD-licensed alternative to programs such
  as GNU Screen.


pkgId: 4f1cebb5b74962b4e78027b78141d76b860ab854876f83dfade584d1ac8506de
name: tpm2-tss
arch: s390x
version: 4.1.3
epoch: 0
release: 2.el10
summary: TPM2.0 Software Stack
url: https://github.com/tpm2-software/tpm2-tss
rpm_license: BSD-2-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: tpm2-tss-4.1.3-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/tpm2-tss-4.1.3-2.el10.s390x.rpm
checksum_type: sha256
description:
  tpm2-tss is a software stack supporting Trusted Platform Module(TPM) 2.0 system
  APIs. It sits between TPM driver and applications, providing TPM2.0 specified
  APIs for applications to access TPM module through kernel TPM drivers.


pkgId: 89885b8aa91c762cd30cc5e1a8b740c897c216759e2aa00db6e16063c3455634
name: trace-cmd
arch: s390x
version: 3.2
epoch: 0
release: 4.el10
summary: A user interface to Ftrace
url: http://git.kernel.org/?p=linux/kernel/git/rostedt/trace-cmd.git;a=summary
rpm_license: LGPL-2.1-only AND LGPL-2.1-or-later AND GPL-2.0-only AND GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: trace-cmd-3.2-4.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/trace-cmd-3.2-4.el10.s390x.rpm
checksum_type: sha256
description:
  trace-cmd is a user interface to Ftrace. Instead of needing to use the
  debugfs directly, trace-cmd will handle of setting of options and
  tracers and will record into a data file.


pkgId: b3e07111b16e579cb52fdc9d5902301a64c2c9be2a5ab14158fabc7b6106a8c0
name: traceroute
arch: s390x
version: 2.1.5
epoch: 3
release: 3.el10
summary: Traces the route taken by packets over an IPv4/IPv6 network
url: http://traceroute.sourceforge.net
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: traceroute-2.1.5-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/traceroute-2.1.5-3.el10.s390x.rpm
checksum_type: sha256
description:
  The traceroute utility displays the route used by IP packets on their
  way to a specified network (or Internet) host.  Traceroute displays
  the IP number and host name (if possible) of the machines along the
  route taken by the packets.  Traceroute is used as a network debugging
  tool.  If you're having network connectivity problems, traceroute will
  show you where the trouble is coming from along the route.

  Install traceroute if you need a tool for diagnosing network connectivity
  problems.


pkgId: 8db4b7885f3a6426dac32f8288bc9d78f02343e0c2521a1f391d62700bbda87e
name: tree
arch: s390x
version: 2.1.0
epoch: 0
release: 6.el10
summary: File system tree viewer
url: https://mama.indstate.edu/users/ice/tree/
rpm_license: GPL-2.0-or-later AND LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: tree-pkg-2.1.0-6.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/tree-2.1.0-6.el10.s390x.rpm
checksum_type: sha256
description:
  The tree utility recursively displays the contents of directories in a
  tree-like format.  Tree is basically a UNIX port of the DOS tree
  utility.


pkgId: 4a8ded340e021f12ef94ccc690efaa616de7c051ef7aedfcbd925043f909721a
name: tuna
arch: noarch
version: 0.19
epoch: 0
release: 18.el10
summary: Application tuning GUI & command line utility
url: https://rt.wiki.kernel.org/index.php/Tuna
rpm_license: GPL-2.0-only AND LGPL-2.1-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: ppc64le-02.stream.rdu2.redhat.com
rpm_sourcerpm: tuna-0.19-18.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/tuna-0.19-18.el10.noarch.rpm
checksum_type: sha256
description:
  Provides interface for changing scheduler and IRQ tunables, at whole CPU and at
  per thread/IRQ level. Allows isolating CPUs for use by a specific application
  and moving threads and interrupts to a CPU by just dragging and dropping them.
  Operations can be done on CPU sockets, understanding CPU topology.

  Can be used as a command line utility without requiring the GUI libraries to be
  installed.


pkgId: 9c5db4161aa9d1fe83b0157a2acd111672b1f9f37039e345c5a64ab62abe3294
name: tuned
arch: noarch
version: 2.26.0
epoch: 0
release: 0.1.rc1.el10
summary: A dynamic adaptive system tuning daemon
url: http://www.tuned-project.org/
rpm_license: GPL-2.0-or-later AND CC-BY-SA-3.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: tuned-2.26.0-0.1.rc1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/tuned-2.26.0-0.1.rc1.el10.noarch.rpm
checksum_type: sha256
description:
  The tuned package contains a daemon that tunes system settings dynamically.
  It does so by monitoring the usage of several system components periodically.
  Based on that information components will then be put into lower or higher
  power saving modes to adapt to the current usage. Currently only ethernet
  network and ATA harddisk devices are implemented.


pkgId: 0dff04280a5d898253544cd437c44952958c924bf7f8ddb70a8d9a5a3cf10570
name: unbound
arch: s390x
version: 1.24.2
epoch: 0
release: 7.el10
summary: Validating, recursive, and caching DNS(SEC) resolver
url: https://nlnetlabs.nl/projects/unbound/
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: unbound-1.24.2-7.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/unbound-1.24.2-7.el10.s390x.rpm
checksum_type: sha256
description:
  Unbound is a validating, recursive, and caching DNS(SEC) resolver.

  The C implementation of Unbound is developed and maintained by NLnet
  Labs. It is based on ideas and algorithms taken from a java prototype
  developed by Verisign labs, Nominet, Kirei and ep.net.

  Unbound is designed as a set of modular components, so that also
  DNSSEC (secure DNS) validation and stub-resolvers (that do not run
  as a server, but are linked into an application) are easily possible.


pkgId: bcdbcaa6b849b102bc5483532e1c76c4b482df6c324f27597b664b01c36e2b1f
name: units
arch: s390x
version: 2.22
epoch: 0
release: 10.el10
summary: A utility for converting amounts from one unit to another
url: https://www.gnu.org/software/units/units.html
rpm_license: GPL-3.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: units-2.22-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/units-2.22-10.el10.s390x.rpm
checksum_type: sha256
description:
  Units converts an amount from one unit to another, or tells you what
  mathematical operation you need to perform to convert from one unit to
  another. The units program can handle multiplicative scale changes as
  well as conversions such as Fahrenheit to Celsius.


pkgId: 8705145c375a21468c7051624a5f6afe0e7c91477ebe76332d514f96515b094e
name: unzip
arch: s390x
version: 6.0
epoch: 0
release: 64.el10
summary: A utility for unpacking zip files
url: http://infozip.sourceforge.net
rpm_license: Info-ZIP
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: unzip-6.0-64.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/unzip-6.0-64.el10.s390x.rpm
checksum_type: sha256
description:
  The unzip utility is used to list, test, or extract files from a zip
  archive.  Zip archives are commonly found on MS-DOS systems.  The zip
  utility, included in the zip package, creates zip archives.  Zip and
  unzip are both compatible with archives created by PKWARE(R)'s PKZIP
  for MS-DOS, but the programs' options and default behaviors do differ
  in some respects.

  Install the unzip package if you need to list, test or extract files from
  a zip archive.


pkgId: 00606241bdd4717570bf79f68b5c52273732e6c9372ef13c8dbe6689bc8bc3e0
name: usermode
arch: s390x
version: 1.114
epoch: 0
release: 10.el10
summary: Tools for certain user account management tasks
url: https://pagure.io/usermode/
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: usermode-1.114-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/usermode-1.114-10.el10.s390x.rpm
checksum_type: sha256
description:
  The usermode package contains the userhelper program, which can be
  used to allow configured programs to be run with superuser privileges
  by ordinary users.


pkgId: a17516ee93228dcaa2a9b50240ca503c60d34c686c5261d5390f837cdc015f24
name: userspace-rcu
arch: s390x
version: 0.14.0
epoch: 0
release: 6.el10
summary: RCU (read-copy-update) implementation in user-space
url: http://liburcu.org
rpm_license: LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: userspace-rcu-0.14.0-6.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/userspace-rcu-0.14.0-6.el10.s390x.rpm
checksum_type: sha256
description:
  This data synchronization library provides read-side access which scales
  linearly with the number of cores. It does so by allowing multiples copies
  of a given data structure to live at the same time, and by monitoring
  the data structure accesses to detect grace periods after which memory
  reclamation is possible.


pkgId: a7f941376450b1a82a64bf6f0dc6ba70eb9f456493f87f79d989a5536a16890e
name: util-linux
arch: s390x
version: 2.40.2
epoch: 0
release: 10.el10
summary: Collection of basic system utilities
url: https://en.wikipedia.org/wiki/Util-linux
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: util-linux-2.40.2-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/util-linux-2.40.2-10.el10.s390x.rpm
checksum_type: sha256
description:
  The util-linux package contains a large variety of low-level system
  utilities that are necessary for a Linux system to function. Among
  others, util-linux contains the fdisk configuration tool and the login
  program.

rpm_license:
  GPL-1.0-or-later AND GPL-2.0-only AND GPL-2.0-or-later AND GPL-3.0-or-later AND LGPL-2.1-or-later AND BSD-2-Clause AND BSD-3-Clause AND BSD-4-Clause-UC AND LicenseRef-Fedora-Public-Domain


pkgId: c1a7ce74bf3b3ac6ca667ff933483c695baf3dba49eb21f59a68220a149fbfe3
name: util-linux
arch: s390x
version: 2.40.2
epoch: 0
release: 13.el10
summary: Collection of basic system utilities
url: https://en.wikipedia.org/wiki/Util-linux
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: util-linux-2.40.2-13.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/util-linux-2.40.2-13.el10.s390x.rpm
checksum_type: sha256
description:
  The util-linux package contains a large variety of low-level system
  utilities that are necessary for a Linux system to function. Among
  others, util-linux contains the fdisk configuration tool and the login
  program.

rpm_license:
  GPL-1.0-or-later AND GPL-2.0-only AND GPL-2.0-or-later AND GPL-3.0-or-later AND LGPL-2.1-or-later AND EUPL-1.2 AND BSD-2-Clause AND BSD-3-Clause AND BSD-4-Clause-UC AND LicenseRef-Fedora-Public-Domain


pkgId: 8a71c86ad22026330cddfc9fb52fc28d469934840b88031ade1c2a7bcc4f0a2c
name: util-linux-core
arch: s390x
version: 2.40.2
epoch: 0
release: 10.el10
summary: The most essential utilities from the util-linux suite
description:
  This is a very basic set of Linux utilities that is necessary on
  minimal installations.

url: https://en.wikipedia.org/wiki/Util-linux
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: util-linux-2.40.2-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/util-linux-core-2.40.2-10.el10.s390x.rpm
checksum_type: sha256
rpm_license:
  GPL-2.0-only AND GPL-2.0-or-later AND BSD-2-Clause AND BSD-3-Clause AND BSD-4-Clause-UC AND LicenseRef-Fedora-Public-Domain


pkgId: 32b49a2dba096d2314eed4bf505d38107ee699d2236cb89e4a4780f2377ebda0
name: vdo
arch: s390x
version: 8.3.0.71
epoch: 0
release: 1.el10
summary: Management tools for Virtual Data Optimizer
url: https://github.com/dm-vdo/vdo
rpm_license: GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: vdo-8.3.0.71-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/vdo-8.3.0.71-1.el10.s390x.rpm
checksum_type: sha256
description:
  Virtual Data Optimizer (VDO) is a device mapper target that delivers
  block-level deduplication, compression, and thin provisioning.

  This package provides the user-space management tools for VDO.


pkgId: 96835bccc01fd184a01f671aefea87bdf8d1a267d586fab4868840614b077f3f
name: vdo-support
arch: s390x
version: 8.3.0.71
epoch: 0
release: 1.el10
summary: Support tools for Virtual Data Optimizer
url: https://github.com/dm-vdo/vdo
rpm_license: GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: vdo-8.3.0.71-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/vdo-support-8.3.0.71-1.el10.s390x.rpm
checksum_type: sha256
description:
  Virtual Data Optimizer (VDO) is a device mapper target that delivers
  block-level deduplication, compression, and thin provisioning.

  This package provides the user-space support tools for VDO.


pkgId: e525c7b168916b196d3a94202784cb14c48df59224648798e4a5a33abd09dc18
name: veritysetup
arch: s390x
version: 2.7.3
epoch: 0
release: 2.el10
summary: A utility for setting up dm-verity volumes
url: https://gitlab.com/cryptsetup/cryptsetup
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: cryptsetup-2.7.3-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/veritysetup-2.7.3-2.el10.s390x.rpm
checksum_type: sha256
description:
  The veritysetup package contains a utility for setting up
  disk verification using dm-verity kernel module.

rpm_license:
[cell repeats an earlier one in this file: 106 characters]


pkgId: 8bf2ce587977da1cd39e3b17c31c127c3db3630bad3656daa29d77f7794815dd
name: vim-data
arch: noarch
version: 9.1.083
epoch: 2
release: 10.el10
summary: Shared data for Vi and Vim
url: http://www.vim.org/
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-03.stream.rdu2.redhat.com
rpm_sourcerpm: vim-9.1.083-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/vim-data-9.1.083-10.el10.noarch.rpm
checksum_type: sha256
description:
  The subpackage is used for shipping files and directories, which need to be
  shared between vim-minimal and vim-common packages.

rpm_license:
  Vim AND LGPL-2.1-or-later AND MIT AND GPL-1.0-only AND (GPL-2.0-only OR Vim) AND Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND GPL-2.0-or-later AND GPL-3.0-or-later AND OPUBL-1.0


pkgId: c8c1428a419104597aaaa3e35c71f25692e4654e7fe47b7941a908e37ea2e579
name: vim-filesystem
arch: noarch
version: 9.1.083
epoch: 2
release: 10.el10
summary: VIM filesystem layout
url: http://www.vim.org/
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-03.stream.rdu2.redhat.com
rpm_sourcerpm: vim-9.1.083-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/vim-filesystem-9.1.083-10.el10.noarch.rpm
checksum_type: sha256
description:
  This package provides some directories which are required by other
  packages that add vim files, p.e.  additional syntax files or filetypes.

rpm_license:
[cell repeats an earlier one in this file: 181 characters]


pkgId: 659d0eaeb093761c30fd4e2442ec03b11150cd03a477df153343449d0abb62bc
name: vim-minimal
arch: s390x
version: 9.1.083
epoch: 2
release: 10.el10
summary: A minimal version of the VIM editor
url: http://www.vim.org/
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: vim-9.1.083-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/vim-minimal-9.1.083-10.el10.s390x.rpm
checksum_type: sha256
description:
  VIM (VIsual editor iMproved) is an updated and improved version of the
  vi editor.  Vi was the first real screen-based editor for UNIX, and is
  still very popular.  VIM improves on vi by adding new features:
  multiple windows, multi-level undo, block highlighting and more. The
  vim-minimal package includes a minimal version of VIM, providing
  the commands vi, view, ex, rvi, and rview. NOTE: The online help is
  only available when the vim-common package is installed.

rpm_license:
[cell repeats an earlier one in this file: 181 characters]


pkgId: b5a78377fa055ddf687abad483daa571a3f269ae2e2873e900ff14e7eeebf19b
name: virt-what
arch: s390x
version: 1.26
epoch: 0
release: 1.el10
summary: Detect if we are running in a virtual machine
url: http://people.redhat.com/~rjones/virt-what/
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: virt-what-1.26-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/virt-what-1.26-1.el10.s390x.rpm
checksum_type: sha256
description:
  virt-what is a shell script which can be used to detect if the program
  is running in a virtual machine.

  The program prints out a list of "facts" about the virtual machine,
  derived from heuristics.  One fact is printed per line.

  If nothing is printed and the script exits with code 0 (no error),
  then it can mean either that the program is running on bare-metal or
  the program is running inside a type of virtual machine which we don't
  know about or can't detect.

  Current types of virtualization detected:

   - alibaba_cloud      Alibaba cloud
   - alibaba_cloud-ebm
   - aws                Amazon Web Services
   - bhyve              FreeBSD hypervisor
   - docker             Docker container
   - google_cloud       Google cloud
   - hyperv             Microsoft Hyper-V
   - ibm_power-kvm      IBM POWER KVM
   - ibm_power-lpar_shared IBM POWER LPAR (hardware partition)
   - ibm_power-lpar_dedicated
   - ibm_systemz-*      IBM SystemZ Direct / LPAR / z/VM / KVM
   - illumos-lx         Illumos with Linux syscall emulation
   - ldoms              Oracle VM Server for SPARC Logical Domains
   - linux_vserver      Linux VServer container
   - lxc                Linux LXC container
   - kvm                Linux Kernel Virtual Machine (KVM)
   - lkvm               LKVM / kvmtool
   - nutanix_ahv        Nutanix Acropolis Hypervisor (AHV)
   - openvz             OpenVZ or Virtuozzo
   - ovirt              oVirt node
   - parallels          Parallels Virtual Platform
   - podman             Podman container
   - powervm_lx86       IBM PowerVM Lx86 Linux/x86 emulator
   - qemu               QEMU (unaccelerated)
   - redhat             Red Hat hypervisor
   - rhev               Red Hat Enterprise Virtualization
   - uml                User-Mode Linux (UML)
   - virtage            Hitachi Virtualization Manager (HVM) Virtage LPAR
   - virtualbox         VirtualBox
   - virtualpc          Microsoft VirtualPC
   - vmm                vmm OpenBSD hypervisor
   - vmware             VMware
   - xen                Xen
   - xen-dom0           Xen dom0 (privileged domain)
   - xen-domU           Xen domU (paravirtualized guest domain)
   - xen-hvm            Xen guest fully virtualized (HVM)


pkgId: 8beabe658e878c10c6bc6c7aa96fda3f5b8fc550079f52ee2872a7c82787cb25
name: which
arch: s390x
version: 2.21
epoch: 0
release: 42.el10
summary: Displays where a particular program in your path is located
url: https://savannah.gnu.org/projects/which/
rpm_license: GPL-3.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: which-2.21-42.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/which-2.21-42.el10.s390x.rpm
checksum_type: sha256
description:
  The which command shows the full pathname of a specified program, if
  the specified program is in your PATH.


pkgId: 71a0490d34d2be4d4ab5863b247b6a8ea0c15fe20373849ec0367b9d06977a9d
name: wireless-regdb
arch: noarch
version: 2024.01.23
epoch: 0
release: 2.el10
summary: Regulatory database for 802.11 wireless networking
url: https://wireless.wiki.kernel.org/en/developers/regulatory/wireless-regdb
rpm_license: ISC
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: x86-02.stream.rdu2.redhat.com
rpm_sourcerpm: wireless-regdb-2024.01.23-2.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/wireless-regdb-2024.01.23-2.el10.noarch.rpm
checksum_type: sha256
description:
  The wireless-regdb package provides the regulatory rules database
  used by the kernels 802.11 networking stack in order to comply
  with radio frequency regulatory rules around the world.


pkgId: 8cb524e51c3eddb32fb263afc085ff1b90bebdf713bcc262897a326e288b00a5
name: words
arch: noarch
version: 3.0
epoch: 0
release: 46.el10
summary: Dictionary of English words for the /usr/share/dict directory
url: https://en.wikipedia.org/wiki/Moby_Project
rpm_license: LicenseRef-Fedora-Public-Domain
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-05.stream.rdu2.redhat.com
rpm_sourcerpm: words-3.0-46.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/words-3.0-46.el10.noarch.rpm
checksum_type: sha256
description:
  The words file is a dictionary of English words for the
  /usr/share/dict directory. Some programs use this database of
  words to check spelling. Password checkers use it to look for bad
  passwords.


pkgId: 44d922b15ab5ede4af0c25bbe6d559f4ce8966f7beb913434090de72084629bd
name: wpa_supplicant
arch: s390x
version: 2.10
epoch: 1
release: 11.el10
summary: WPA/WPA2/IEEE 802.1X Supplicant
url: http://w1.fi/wpa_supplicant/
rpm_license: BSD-3-Clause
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: wpa_supplicant-2.10-11.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/wpa_supplicant-2.10-11.el10.s390x.rpm
checksum_type: sha256
description:
  wpa_supplicant is a WPA Supplicant for Linux, BSD and Windows with support
  for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA
  component that is used in the client stations. It implements key negotiation
  with a WPA Authenticator and it controls the roaming and IEEE 802.11
  authentication/association of the wlan driver.


pkgId: a8a4d35b95101729dd5f46207c69ce3d983942961ecf2c50f440948ed2c54600
name: x3270
arch: s390x
version: 4.3ga8
epoch: 0
release: 5.el10
summary: An X Window System based IBM 3278/3279 terminal emulator
url: https://x3270.miraheze.org/wiki/Main_Page
rpm_license: BSD-3-Clause AND MIT AND Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: x3270-4.3ga8-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/x3270-4.3ga8-5.el10.s390x.rpm
checksum_type: sha256
description:
  The x3270 package contains files needed for emulating the IBM 3278/3279
  terminals, commonly used with mainframe applications.

  You will also need to install a frontend for x3270. Available frontends
  are x3270-x11 (for the X Window System) and x3270-text (for text mode).


pkgId: 9947ad80050cc94a41936cf7453769368d544ee031cf1298ac107f6822aeed32
name: x3270-text
arch: s390x
version: 4.3ga8
epoch: 0
release: 5.el10
summary: IBM 3278/3279 terminal emulator for text mode
url: https://x3270.miraheze.org/wiki/Main_Page
rpm_license: BSD-3-Clause AND MIT AND Apache-2.0
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: x3270-4.3ga8-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/x3270-text-4.3ga8-5.el10.s390x.rpm
checksum_type: sha256
description:
  The c3270 program opens a 3270 terminal which emulates the actual look of an
  IBM 3278/3279 terminal, commonly used with mainframe applications.
  x3270 also allows you to telnet to an IBM host from the x3270 window.

  Install the x3270-text package if you need to access IBM hosts using an IBM
  3278/3279 terminal emulator without running X.


pkgId: 3d49a15669e709b10fc1a892e5c0b98f2395a4a4ac78a95e0d967951f105d963
name: xfsdump
arch: s390x
version: 3.1.12
epoch: 0
release: 5.el10
summary: Backup and restore utilities for the XFS filesystem
rpm_license: GPL-1.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: xfsdump-3.1.12-5.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/xfsdump-3.1.12-5.el10.s390x.rpm
checksum_type: sha256
description:
  The xfsdump package contains xfsdump, xfsrestore and a number of
  other utilities for administering XFS filesystems.

  xfsdump examines files in a filesystem, determines which need to be
  backed up, and copies those files to a specified disk, tape or other
  storage medium.	 It uses XFS-specific directives for optimizing the
  dump of an XFS filesystem, and also knows how to backup XFS extended
  attributes.  Backups created with xfsdump are "endian safe" and can
  thus be transfered between Linux machines of different architectures
  and also between IRIX machines.

  xfsrestore performs the inverse function of xfsdump; it can restore a
  full backup of a filesystem.  Subsequent incremental backups can then
  be layered on top of the full backup.  Single files and directory
  subtrees may be restored from full or partial backups.


pkgId: 0320c9cef096f1824dfadf6e4e6d7e87d2c723e554882ccc1cb10546000236c7
name: xfsprogs
arch: s390x
version: 6.11.0
epoch: 0
release: 1.el10
summary: Utilities for managing the XFS filesystem
url: https://xfs.wiki.kernel.org
rpm_license: GPL-1.0-or-later AND LGPL-2.1-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: xfsprogs-6.11.0-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/xfsprogs-6.11.0-1.el10.s390x.rpm
checksum_type: sha256
description:
  A set of commands to use the XFS filesystem, including mkfs.xfs.

  XFS is a high performance journaling filesystem which originated
  on the SGI IRIX platform.  It is completely multi-threaded, can
  support large files and large filesystems, extended attributes,
  variable block sizes, is extent based, and makes extensive use of
  Btrees (directories, extents, free space) to aid both performance
  and scalability.

  This implementation is on-disk compatible with the IRIX version
  of XFS.


pkgId: 1bbbd36d6f2dadb45eac675b24a086e6b7f1c0cf3205d7f1e710cb4bfb54a46c
name: xz
arch: s390x
version: 5.6.2
epoch: 1
release: 1.el10
summary: LZMA compression utilities
url: https://tukaani.org/xz/
rpm_license: GPL-2.0-or-later AND LicenseRef-Fedora-Public-Domain
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: xz-5.6.2-1.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/xz-5.6.2-1.el10.s390x.rpm
checksum_type: sha256
description:
  XZ Utils are an attempt to make LZMA compression easy to use on free (as in
  freedom) operating systems. This is achieved by providing tools and libraries
  which are similar to use than the equivalents of the most popular existing
  compression algorithms.

  LZMA is a general purpose compression algorithm designed by Igor Pavlov as
  part of 7-Zip. It provides high compression ratio while keeping the
  decompression speed fast.


pkgId: d7e8dcf09c46d5b241641bda8c0956402e4bafe4b69987d81af3a90946370ed7
name: yum-utils
arch: noarch
version: 4.7.0
epoch: 0
release: 10.el10
summary: Yum-utils CLI compatibility layer
url: https://github.com/rpm-software-management/dnf-plugins-core
rpm_license: GPL-2.0-or-later
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: aarch64-06.stream.rdu2.redhat.com
rpm_sourcerpm: dnf-plugins-core-4.7.0-10.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/yum-utils-4.7.0-10.el10.noarch.rpm
checksum_type: sha256
description:
  As a Yum-utils CLI compatibility layer, supplies in CLI shims for
  debuginfo-install, repograph, package-cleanup, repoclosure, repomanage,
  repoquery, reposync, repotrack, repodiff, builddep, config-manager,
  download and yum-groups-manager that use new implementations using DNF.


pkgId: acd166aa393ea2f373011b404a0d19557e209d144f098085a1a88095267f4f4e
name: zip
arch: s390x
version: 3.0
epoch: 0
release: 42.el10
summary: A file compression and packaging utility compatible with PKZIP
url: http://www.info-zip.org/Zip.html
rpm_license: Info-ZIP
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-06.stream.rdu2.redhat.com
rpm_sourcerpm: zip-3.0-42.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/zip-3.0-42.el10.s390x.rpm
checksum_type: sha256
description:
  The zip program is a compression and file packaging utility.  Zip is
  analogous to a combination of the UNIX tar and compress commands and
  is compatible with PKZIP (a compression and file packaging utility for
  MS-DOS systems).

  Install the zip package if you need to compress files using the zip
  program.


pkgId: 1c0aa6be1eb42d3b41ed3f1bdf65254ca319d8749d998bc2a3adc271066b463e
name: zlib-ng-compat
arch: s390x
version: 2.1.6
epoch: 0
release: 3.el10
summary: Zlib implementation provided by zlib-ng
url: https://github.com/zlib-ng/zlib-ng
rpm_license: Zlib
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: zlib-ng-2.1.6-3.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/zlib-ng-compat-2.1.6-3.el10.s390x.rpm
checksum_type: sha256
description:
  zlib-ng is a zlib replacement that provides optimizations for "next generation"
  systems.
  The zlib-ng-compat package contains the library that is API and binary
  compatible with zlib.


pkgId: 5d832b7db0d4c8c02b8245fb78e7f578152522e19c61cc39d6ad08119ba7a773
name: zsh
arch: s390x
version: 5.9
epoch: 0
release: 14.el10
summary: Powerful interactive shell
url: http://zsh.sourceforge.net/
rpm_license: MIT-Modern-Variant AND ISC AND GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-08.stream.rdu2.redhat.com
rpm_sourcerpm: zsh-5.9-14.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/zsh-5.9-14.el10.s390x.rpm
checksum_type: sha256
description:
  The zsh shell is a command interpreter usable as an interactive login
  shell and as a shell script command processor.  Zsh resembles the ksh
  shell (the Korn shell), but includes many enhancements.  Zsh supports
  command line editing, built-in spelling correction, programmable
  command completion, shell functions (with autoloading), a history
  mechanism, and more.


pkgId: efd6c263ad670d77397e3684d942d4f3e7568df2a0ccf99cc7e10cc7792476a0
name: zstd
arch: s390x
version: 1.5.5
epoch: 0
release: 8.el10
summary: Zstd compression library
url: https://github.com/facebook/zstd
rpm_license: BSD-3-Clause AND GPL-2.0-only
rpm_vendor: CentOS
rpm_group: Unspecified
rpm_buildhost: s390-07.stream.rdu2.redhat.com
rpm_sourcerpm: zstd-1.5.5-8.el10.src.rpm
rpm_packager: builder@centos.org
location_href: Packages/zstd-1.5.5-8.el10.s390x.rpm
checksum_type: sha256
description:
  Zstd, short for Zstandard, is a fast lossless compression algorithm,
  targeting real-time compression scenarios at zlib-level compression ratio.


